to top Arrow Up

TKHD85-R RMF

Aluminum stay RMF – frame stay solid

tkhd85-r-rmf_start.png

Properties

  • Aluminum profile bars for heavy loads and large cable carrier widths. Easy threaded connection.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
test
Stay arrangement on every 2<sup>nd</sup> chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bi 100 – 800 mm in 1 mm width sections

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for odd number of chain links
t
[mm]
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm] *
Bk
[mm]
qk
[kg/m]
855884.585100 – 800Bi + 546.021 – 13.119
* in 1 mm width sections
KR
[mm]
240300350400
Order example
Order code

TKHD85-R

400

RMF

300

2125

VS

Inner distribution

Divider systems

As a standard, the divider system is mounted on every 2nd chain link on the inside plate. As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (Version A).

For applications with lateral acceleration and free hanging on the side, the dividers can be attached by simple insertion of a fixing profile into the RMF stay, available as an accessory (Version B).

Divider system TS0

without height separation
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A102016
B1020165

The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS0

Divider system TS1

with continuous height separation
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A1020162
B10201652

The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS1
Order example
Order code

TS1

A

3

VD1

VD3

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

TKHD85-R End Connector steel short
TKHD85-R End Connector steel short
TKHD85-R End Connector steel short
Connection point

F – fixed point
M – driver

Connection type

A – connection surface outside
I – connection surface inside

Connection surface

A – threaded joint to outside (standard)
I – threaded joint to inside

Order example
Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Important information

We recommend the use of strain reliefs at the driver and fixed point.

TKHD85-R End Connector steel long
TKHD85-R End Connector steel long
Important information

Use only with C-rail.

TKHD85-R End Connector steel long
Connection point

F – fixed point
M – driver

Connection type

A – connection surface outside
I – connection surface inside

Connection surface

A – threaded joint to outside (standard)
I – threaded joint to inside

Order example
Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Downloads

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Subject to change.
Contact
Please contact us:
Your contact: