-
-
en
Stay arrangement on each chain link (VS: fully-stayed)
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
t
[mm]
|
hi
[mm]
|
hG
[mm]
|
hG'
[mm]
|
Bi
[mm]
* |
Bk
[mm]
|
qk
[kg/m]
|
---|---|---|---|---|---|---|
56 | 33 | 51 | 54.2 | 50 – 400 | Bi + 22 | 1.37 – 3.99 |
KR
[mm]
| |||||||||
---|---|---|---|---|---|---|---|---|---|
60 | 75 | 100 | 125 | 150 | 175 | 200 | 220 | 250 | 300 |
HC 33
330
RSH
150
1960
VS
The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).
For applications with lateral acceleration and lying on the side, the dividers can be attached by simple insertion of a fixing profile into the RSH stay, available as an accessory (Version B).
Vers. |
aT min
[mm]
|
ax min
[mm]
|
ac min
[mm]
|
ax grid
[mm]
|
nT min |
---|---|---|---|---|---|
A | 7 | 13 | 10 | – | – |
B | 7 | 13 | 10 | 2 | – |
The dividers can be moved within the cross section (version A) or fixed (version B).
Vers. |
aT min
[mm]
|
ax min
[mm]
|
ac min
[mm]
|
ax grid
[mm]
|
nT min |
---|---|---|---|---|---|
A | 7 | 13 | 10 | – | 2 |
B | 7 | 13 | 10 | 2 | 2 |
The dividers can be moved within the cross section (version A) or fixed (version B).
Les séparateurs sont mobiles dans la section transversale (version A) ou fixés (version B).
Vers. |
aT min
[mm]
|
ax min
[mm]
|
ac min
[mm]
|
nT min |
---|---|---|---|---|
A | 4 | 16 | 8 | 2 |
The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.
Aluminum partitions with 1 mm increments with ax > 42 mm are also available.
ax (center distance of dividers) [mm] | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ac (nominal width of inner chamber) [mm] | ||||||||||||||||||||||
16 8 | 18 10 | 23 15 | 28 20 | 32 24 | 33 25 | 38 30 | 43 35 | 48 40 | 58 50 | 64 56 | 68 60 | |||||||||||
78 70 | 80 72 | 88 80 | 96 88 | 112 104 | 128 120 | 144 136 | 160 152 | 176 168 | 192 184 | 208 200 |
When using plastic partitions with ax > 112 mm, we recommend an additional center support with a twin divider (ST = 3 mm). Twin dividers are also suitable for retrofitting in the partition system.
TS3
A
2
K1
K5
34
38
VD1
VD3
Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).
If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.
The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom or face on.
F – fixed point
M – driver
U – universal mounting bracket
UMB
F
U
UMB
M
U
UMB
UMB
F
M
U
U
We recommend the use of strain reliefs at the driver and fixed point.
Wir empfehlen die Verwendung von Zugentlastungen vor Mitnehmer und Festpunkt.
Nous recommandons d’utiliser des serre-câbles en amont du point mobile et du point fixe.
Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.
to TRAXLINE®From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.
to TOTALTRAX®Reliable unrolling and optimum gliding for long travel lengths
to support trays and guide channelsConfiguration guidelines:
The latest TSUBAKI KABELSCHLEPP information material: