The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.
|80||110||Bi + 32||3.84 – 4.83|
The divider system is mounted on every 2nd chain link as a standard.
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).
For applications with lateral acceleration and lying on the side, divider with arresting cams are available.
These can be fixed in the latching profile of the stays (Version B).
The dividers can be moved within the cross section (version A) or fixed (version B).
The dividers can be moved within the cross section.
As a standard, the divider version A is used for vertical partitioning within the cable carrier. The complete divider system can be moved within the cross section.
Divider version A
|A||8 / 4*||14||10||2|
* for End divider
The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.
|ax (center distance of dividers) [mm]|
|ac (nominal width of inner chamber) [mm]|
An additional central support is required when using plastic partitions with ax > 49 mm.
Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).
If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.
We recommend the use of strain reliefs before driver and fixed point.
Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.to TRAXLINE®
From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.to TOTALTRAX®
Cable Carriers – Overview of general abbreviations and pictographs
The latest TSUBAKI KABELSCHLEPP information material:
Our Quickfinder supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.