to top Arrow Up
guide-channel_standard-channel_start_02.png
Stay arrangement on every 2<sup>nd</sup> chain link

Zinc plated sheet steel / stainless steel

Stay arrangement on every chain link

Standard lengths 2000 / 3000 mm
Special lengths on request

Standard channel one sided closed
Closed design

One part channel closed at the bottom and one part slide support with run-on bevels.

Standard channel one sided open
Open design

One part channel closed at the bottom and divided slide support with run-on bevels.

Dirt and liquids can drop through without restrictions.

Closed design

One part channel closed at the bottom and one part slide support with run-on bevels.

Standard channel one sided closed
Open design

One part channel closed at the bottom and divided slide support with run-on bevels.

Dirt and liquids can drop through without restrictions.

Standard channel one sided open
Standard channel opposite arrangement closed
Closed design

One part channel closed at the bottom and one part slide support with run-on bevels.

Standard channel opposite arrangement open
Open design

One part channel closed at the bottom and divided slide support with run-on bevels.

Dirt and liquids can drop through without restrictions.

Closed design

One part channel closed at the bottom and one part slide support with run-on bevels.

Standard channel opposite arrangement closed
Open design

One part channel closed at the bottom and divided slide support with run-on bevels.

Dirt and liquids can drop through without restrictions.

Standard channel opposite arrangement open
Important information

A special slide support can be adhered to reduce sliding resistance and abrasion between cable carrier and support. We recommend the use of special slide supports for velocities > 0.5 m/s and for frequent move cycles.

Standard channel dimensions front
Standard channel dimensions above

Support trays - Standard Channel - UNIFLEX Advanced

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
36 70 (KR < 100)
125 (KR ≥ 100)
Bk + 4 BK + 24 2 b1 – 34 (FA) 40 6.2 30 b1 – 65
36 70 (KR < 100)
125 (KR ≥ 100)
Bk + 4 BK + 24 2 b1 – 13.5 (FU) 40 6.2 30 b1 – 65
Glide shoes 38.5 70 (KR < 100)
125 (KR ≥ 100)
Bk + 7 BK + 27 2 b1 – 37 (FA) 40 6.2 30 b1 – 65
Glide shoes 38.5 70 (KR < 100)
125 (KR ≥ 100)
Bk + 7 BK + 27 2 b1 – 16.5 (FU) 50 5.3 30 b1 – 40
50 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 43 (FA) 50 6.5 30 b1 – 85
50 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 16 (FU) 22.5 50 5.3 30 b1 – 40
Glide shoes 53 117 (KR < 200)
200 (KR ≥ 200)
Bk + 9 BK + 29 2 b1 – 47 (FA) 50 6.5 30 b1 – 85
Glide shoes 53 117 (KR < 200)
200 (KR ≥ 200)
Bk + 9 BK + 29 2 b1 – 21 (FU) 22.5 50 5.3 30 b1 – 40
60 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 47 (FA) 60 8.5 30 b1 – 85
60 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 14 (FU) 22.5 60 5.3 30 b1 – 40
Glide shoes 63 117 (KR < 200)
200 (KR ≥ 200)
Bk + 10 BK + 30 2 b1 – 52 (FA) 60 8.5 30 b1 – 85
Glide shoes 63 117 (KR < 200)
200 (KR ≥ 200)
Bk + 10 BK + 30 2 b1 – 19 (FU) 22.5 60 5.3 30 b1 – 40

The designations for dimension A refer to the version of the cable carrier connection.

*   Dimension T for leg length support brackets (guiding channel open type for Bk ≥ 90 mm).
**   Dimension Y for guiding channel open for Bk ≥ 90 mm).

Support trays - Standard Channel - EasyTrax®

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
For types ET0180 and ET0320 we recommend aluminum guide channels.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
36 70 (KR < 100)
125 (KR ≥ 100)
Bk + 4 BK + 24 2 b1 – 34 (FA) 40 6.2 30 b1 – 65
36 70 (KR < 100)
125 (KR ≥ 100)
Bk + 4 BK + 24 2 b1 – 13.5 (FU) 40 6.2 30 b1 – 65
Glide shoes 38.5 70 (KR < 100)
125 (KR ≥ 100)
Bk + 7 BK + 27 2 b1 – 37 (FA) 40 6.2 30 b1 – 65
Glide shoes 38.5 70 (KR < 100)
125 (KR ≥ 100)
Bk + 7 BK + 27 2 b1 – 16.5 (FU) 50 5.3 30 b1 – 40

The designations for dimension A refer to the version of the cable carrier connection.

Support trays - Standard Channel - K series

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA. When using aluminum hole stays, slide discs have to be placed on the side tabs between cable carrier and channel wall for spacing.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
57.5 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 19 (FU) 40 30 6.5 30 b1 – 65
Slide discs 57.5 117 (KR < 200)
200 (KR ≥ 200)
Bk + 13 BK + 33 2 b1 – 27 (FU) 40 30 6.5 30 b1 – 65
78.5 150 (KR < 200)
300 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 20.5 (FU) 50 30 6.5 30 b1 – 65
Slide discs 78.5 150 (KR < 200)
300 (KR ≥ 200)
Bk + 19 BK + 39 2 b1 – 34.5 (FU) 45 30 6.5 30 b1 – 75
Slide discs 78.5 150 (KR < 200)
300 (KR ≥ 200)
Bk + 19 BK + 39 2 b1 – 34.5 (FU) 50 30 6.5 30 b1 – 75

The designations for dimension A refer to the version of the cable carrier connection.

Support trays - Standard Channel - MASTER series

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
Glide shoes 54.2 125 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 13 22.5 30 5.5 30 b1 – 55
Glide shoes 67.2 125 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 15 22.5 30 5.5 30 b1 – 55

The designations for dimension A refer to the version of the cable carrier connection.

Support trays - Standard Channel - M series

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
For type M0320 we recommend aluminum guide channels.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
Glide shoes 41.5 70 (KR < 100)
125 (KR ≥ 100)
Bk + 4 BK + 24 2 b1 – 39 (FI) 24 30 6.5 30 b1 – 55
Glide shoes 60.2 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 55 (FAI) 30 30 6.5 30 b1 – 65
Glide shoes 60.2 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 24 (FU) 22.5 30 6.5 30 b1 – 65
Glide shoes 83.5 150 (KR < 200)
300 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 70 (FAI) 40 30 8.5 30 b1 – 100
Glide shoes 83.5 150 (KR < 200)
300 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 19.5 (FU) 35 30 8.5 30 b1 – 60
Offroad Glide shoes 86 150 (KR < 200)
300 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 70 (FAI) 40 30 8.5 30 b1 – 100
Offroad Glide shoes 86 150 (KR < 200)
300 (KR ≥ 200)
Bk + 5 BK + 25 2 b1 – 19.5 (FU) 35 30 8.5 30 b1 – 60
Glide shoes 99.5 200 (KR < 300)
400 (KR ≥ 300)
Bk + 6 BK + 26 3 b1 – 83 (FAI) 50 30 10.5 30 b1 – 125
Glide shoes 99.5 200 (KR < 300)
400 (KR ≥ 300)
Bk + 6 BK + 26 3 b1 – 23 (FU) 35 30 11 30 b1 – 65
Offroad Glide shoes 103 200 (KR < 300)
400 (KR ≥ 300)
Bk + 6 BK + 26 3 b1 – 83 (FAI) 50 30 10.5 30 b1 – 125
Offroad Glide shoes 103 200 (KR < 300)
400 (KR ≥ 300)
Bk + 6 BK + 26 3 b1 – 23 (FU) 35 30 11 30 b1 – 65
120 250 (KR < 320)
400 (KR ≥ 320)
Bk + 6 BK + 26 3 b1 – 27 (FU) 35 30 11 40 b1 – 75
Glide shoes 127 250 (KR < 320)
400 (KR ≥ 320)
Bk + 6 BK + 26 3 b1 – 27 (FU) 35 30 11 40 b1 – 75

The designations for dimension A refer to the version of the cable carrier connection.

Support trays - Standard Channel - XL - XLT series

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
140 300 (KR < 350)
400 (KR ≥ 350)
Bk + 6 BK + 26 3 b1 – 99 (FAI) 50 40 13.5 40 b1 – 130
Glide shoes 147 300 (KR < 350)
400 (KR ≥ 350)
Bk + 6 BK + 26 3 b1 – 99 (FAI) 50 40 13.5 40 b1 – 130

The designations for dimension A refer to the version of the cable carrier connection.

Support trays - Standard Channel - QUANTUM® series

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
40 70 (KR < 110)
125 (KR ≥ 110)
Bk + 4 BK + 24 2 b1 – 18 (FU) 14 30 6.6 40 b1 – 35
Glide shoes 66 117 (KR < 190)
200 (KR ≥ 190)
Bk + 9 BK + 29 2 b1 – 29 (FU) 29 30 6.6 40 b1 – 45
Glide shoes 88 150 (KR < 200)
300 (KR ≥ 200)
Bk + 13 BK + 33 2 b1 – 38 (FU) 35 40 9 40 b1 – 70
Glide shoes 108 250 (KR < 300)
400 (KR ≥ 300)
Bk + 13 BK + 33 2 b1 – 43 (FU) 35 40 11 40 b1 – 105

The designations for dimension A refer to the version of the cable carrier connection.

Support trays - Standard Channel - TKA series

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
36 70 (KR < 95)
125 (KR ≥ 95)
Bk + 4 BK + 26 2 b1 – 10.5 (FU) 50 4.5 25 b1 – 40
51 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 28 2 b1 – 12 (FU) 15 50 5.5 25 b1 – 60
65 117 (KR < 200)
200 (KR ≥ 200)
Bk + 5 BK + 28 2 b1 – 16 (FU) 15 60 5.5 25 b1 – 60

The designations for dimension A refer to the version of the cable carrier connection.

Support trays - Standard Channel - S/SX series - S/SX tubes

The cable carrier width Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
Glide shoes 56 125 (KR < 155)
200 (KR ≥ 155)
Bk + 10 BK + 30 2 b1 – 47 45 15 6.4 30 b1 – 70
Glide shoes 73 150 (KR < 200)
300 (KR ≥ 200)
Bk + 14 BK + 34 2 b1 – 77 65 20 8.4 30 b1 – 100
Glide shoes 99 200 (KR < 300)
400 (KR ≥ 300)
Bk + 12 BK + 32 3 b1 – 76 80 25 10.5 30 b1 – 100
Offroad Glide shoes 104 200 (KR < 300)
400 (KR ≥ 300)
Bk + 12 BK + 32 3 b1 – 76 80 25 10.5 50 b1 – 100
Glide shoes 155 300 (KR < 435)
500 (KR ≥ 435)
Bk + 17 BK + 37 3 b1 – 94 115 30 13 50 b1 – 120

The designations for dimension A refer to the version of the cable carrier connection.

Guide channel required

Some cable carriers are offered with optional glide shoes.

Our engineers will be happy to help with your project planning – please contact us.

Important information

From hKA ≥ 200 mm, the guide channel flanks are additionally stabilized with alignment flanges or with connecting flanges.

Important information

The dimension y refers only to open guide channel versions.

Standard channel Fixing angle Brackets Front
Standard channel Fixing angle Brackets Side
Standard channel Fixing angle Brackets Above
Standard channel Fixing angle Brackets Perspective
s
[in mm]
b2
[in mm]
X1
[in mm]
2
b1 + 54104
3
b1 + 56106
Important information

The figure shows an open channel version

Important information

The sheet metal thickness “s” corresponds to the respective wall thickness “s” of the channel.

Important information

As a standard, the angle brackets included with the delivery are installed on all joins as well as at both ends of a channel. If you require more angle brackets beyond this, please state this when ordering.

Important information

The length of the C-rail depends on the channel width and is supplied in standard lengths. Please contact us if you require custom lengths.

Calculating C-profile length
C-profile length LP: LP = b1 + 106
C-profile length LP rounded to 50 mm
Fixing kit (optional)

The delivery scope of the standard channel does not include the optional joining clamp fixing kit. 

Fixing kit

  1. C-rail (length depends on b1)
  2. Hexagon socket screws
  3. Slide nut
Standard channel fixing alignment flanges
Calculating C-profile length
C-profile length LP: LP = b1 + 105
C-profile length LP rounded to 50 mm
Standard channel fixing floor fixing bracket
Calculating C-profile length
C-profile length LP: LP = b1 + 66
C-profile length LP rounded to 50 mm
Standard channel fixing lateral connection flange
Calculating C-profile length
C-profile length LP: LP = b1 + 86
C-profile length LP rounded to 50 mm

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories – Support trays and guide channels

Reliable unrolling and optimum gliding for long travel lengths

to support trays and guide channels

other accessories

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Quickfinder
Quickfinder
Close

Quickfinder

Our Quickfinder supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Subject to change.
Contact
Please contact us:
Your contact: