to top 
Ball-bearing rollers for long service life
Support rollers are designed to support the upper run of the cable carrier when the maximum unsupported length is exceeded.
KABELSCHLEPP® support rollers are available for the types LS/LSX 1050, S/SX 0650, S/SX 0950, S/SX 1250 and S/SX 1800.
| BE [mm] | BG [mm] | b1 [mm] | HSR [mm] | HA [mm] | A [mm] | C [mm] |
|---|---|---|---|---|---|---|
| Bk + 52 | Bk + 90 | Bk + 20 | 2 KR + 15 | 2 KR - 50 | Bk - 10 | Bk + 60 |
Support rollers are designed to support the upper run of the cable carrier when the maximum unsupported length is exceeded.
KABELSCHLEPP® reinforced support rollers are available for the types LS/LSX 1050, S/SX 0650, S/SX 0950, S/SX 1250 and S/SX 1800.
| Type | BE [mm] | BG [mm] | DR [mm] | b1 [mm] | BR [mm] | Ds [mm] |
|---|---|---|---|---|---|---|
| LS/LSX 1050 | Bk + 64 | Bk + 174 | 120 | Bk + 20 | Bk + 50 | ⌀ 200 |
| S/SX 0650 | Bk + 59 | Bk + 169 | 90 | Bk + 15 | Bk + 45 | ⌀ 170 |
| S/SX 0950, S/SX 1250, S/SX 1800 | Bk + 64 | Bk + 174 | 120 | Bk + 20 | Bk + 50 | ⌀ 200 |
| S/SX 2500 | Bk + 74 | Bk + 184 | 220 | Bk + 30 | Bk + 60 | ⌀ 300 |
Diameter of support roller DR = 114 mm, for standard stainless steel version. The axis height HA has to be adapted accordingly.
| Type | HA [mm] | BP [mm] | a2 [mm] | a3 [mm] | d [mm] | s [mm] |
|---|---|---|---|---|---|---|
| LS/LSX 1050 | 2 KR - 60 | 100 | 20 | 80 | ⌀ 18 | 8 |
| S/SX 0650 | 2 KR - 45 | 80 | 40 | – | ⌀ 14 | 8 |
| S/SX 0950, S/SX 1250, S/SX 1800 | 2 KR - 60 | 100 | 20 | 80 | ⌀ 18 | 8 |
| S/SX 2500 | 2 KR - 110 | 100 | 20 | 80 | ⌀ 18 | 8 |
Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.
to TRAXLINE®From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.
to TOTALTRAX®Reliable unrolling and optimum gliding for long travel lengths
to Support traysFor optimum placement with dynamic use of cables
to Strain relief devices
Configuration guidelines:
The latest TSUBAKI KABELSCHLEPP information material:
Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens outward
Opens inward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
Roller chain
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
