to top Arrow Up

UA1665.RMA

Stay variant RMA Mounting frame stay

ua1665_rma_start.jpg

Properties

  • Weight-optimized plastic frame with particularly high torsional rigidity.
  • Plastic crossbars and aluminum profile bars with plastic mounting frame stays for guiding very large cable diameters.
  • Outside/inside: threaded joint easy to release.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 125 – 200 mm

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
Bk
[mm]
qk (RVAI)*
[kg/m]
qk (RVAO)*
[kg/m]
4460Bi + 22 3.1 – 3.95 3.58 – 4.66
Bi
[mm]
5075100125150175200225250
KR
[mm]
75100120140200250300
Order example
Order code

UA1665

1500

RMA

140

2660

RVAO

Our technical support can provide help for gliding arrangements: postmaster@metool.com

Assembly instructions

UA1665 RMA Assembly variants RVAI

RVAI – assembly to the inside:
standard pitch, mounting frame stay on every 4th stay, no screw fixing. Gliding application is not possible when using assembly version RVAI.
Observe minimum KR:
Hi = 114 mm: KRmin    = 200 mm
Hi = 139 mm: KRmin    = 250 mm
Hi = 164 mm: KRmin    = 300 mm
Hi = 189 mm: KRmin    = 300 mm

UA1665 RMA Assembly variants RVAO

RVAO – assembly to the outside:
standard pitch, mounting frame stay on every 2nd stay, screw fixing.
The cable carrier has to rest on the side bands and not on the stays.
Guiding in a channel is required for support. Please contact our technical support at technik@kabelschlepp.de to find the corresponding guide channel.
Please note the operating and installation height.

End connectors

UA1665 End Connector UMB
UA1665 End Connector UMB
Important information

Recommended tightening torque: 
5 Nm for screws M5 - 8.8

Bi
[mm]
nz
50
2 x 3
75
2 x 5
100
2 x 7
125
2 x 9
150
2 x 11
175
2 x 13
UA1665 End Connector UMB

The end connectors are optionally also available without strain relief comb or with C-rail Art. no. 3931 (1 on each side) for clamps. Please state when ordering.


UA1665 End Connector UMB
Connection point

F – fixed point
M – driver

Connection type

– universal mounting bracket

Order example
Order code

UMB

F

U

UMB

M

U

End connector

UMB

UMB

Connection point

F

M

Connection type

U

U

Important information

We recommend the use of strain reliefs before driver and fixed point.

UA1665 End Connector
UA1665 End Connector
Important information

Recommended tightening torque: 15 Nm for screws M8 - 8.8

Bi
[mm]
nz
50
2 x 4
75
2 x 6
100
2 x 8
125
2 x 10
150
2 x 12
175
2 x 14
200
2 x 16
225
2 x 18
250
2 x 20
UA1665 End Connector

The end connectors are optionally also available without strain relief comb. Please state when ordering.


UA1665 End Connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Order example
Order code

End connector

F

A

End connector

M

A

End connector

End connector

End connector

Connection point

F

M

Connection type

A

A

Downloads

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories – Support trays and guide channels

Reliable unrolling and optimum gliding for long travel lengths

to support trays and guide channels

other accessories

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Quickfinder
Quickfinder
Close

Quickfinder

Our Quickfinder supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Subject to change.
Contact
Please contact us:
Your contact: