TKHP85 RMF

Aluminum stay RMF – frame stay solid

Properties

Aluminum profile bars for heavy loads and large cable carrier widths. Easy threaded connection.
Available customized in 1 mm grid.
Inside/outside: Threaded joint easy to release.

Stay arrangement on each chain link (VS: fully-stayed)

B_i 100 – 800 mm in 1 mm width sections

All pictographs

Dimensions

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length

Cable carrier length L_K: L_K≈ L_S/2 + L_B

Cable carrier length L_k rounded to pitch t for odd number of chain links

t [mm]	h_i [mm]	h_G [mm]	h_G' [mm]	B_i [mm] ^*	B_k [mm]	B_EF [mm]	q_k [kg/m]
85	58	84	90.5	100 – 800	B_i + 54	B_i + 54	6.02 – 13.12

^* in 1 mm width sections

KR [mm]
240	300	350	400

Order example

TKHP85

Type

400

B_i [mm]

RMF

Stay variant

300

KR [mm]

2125

L_k [mm]

Stay arrangement

Our technical support can provide help for gliding arrangements: postmaster@metool.com

Inner distribution

Divider systems

As a standard, the divider system is mounted on every 2^nd chain link on the inside plate. As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

For applications with lateral acceleration and free hanging on the side, the dividers can be attached by simple insertion of a fixing profile into the RMF stay, available as an accessory (version B).

Divider system TS0

without height separation

Vers.	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x grid} [mm]	n_{T min}
A	7.5/10.5^*	15	11	–	–
B	7.5/10.5*	15	11	5	–

* With glide shoes

The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS1

with continuous height separation

Vers.	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x grid} [mm]	n_{T min}
A	7.5/10.5^*	15	11	–	2
B	7.5/10.5*	15	11	5	2

* With glide shoes

The dividers can be moved within the cross section (version A) or fixed (version B).

Order example

TS1

Divider system

Version

n_T

VD1

VD3

Height separation

Please state the designation of the divider system (TS0, TS1,...), the version, and the number of dividers per cross section [n_T].
When using divider systems with height separation (TS1), please additionally state the position (e.g. VD1) viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

End connectors – steel short (standard)

The connection variants on the fixed point and on the driver can be combined and changed later on, if necessary.

Connection point

F – fixed point
M – driver

Connection type

A – connection surface outside
I – connection surface inside

Connection surface

A – threaded joint to outside (standard)
I – threaded joint to inside

Order example

Steel

End connector

Connection point

Connection type

Connection surface

End connector

Steel

Connection point

Connection type

Connection surface

End connectors LF – steel long

The connection variants on the fixed point and on the driver can be combined and changed later on, if necessary.

Use only with C-rail.

Connection point

F – fixed point
M – driver

Connection type

A – connection surface outside
I – connection surface inside

Connection surface

A – threaded joint to outside (standard)
I – threaded joint to inside

Order example

Steel LF

End connector

Connection point

Connection type

Connection surface

End connector

Steel LF

Connection point

Connection type

Connection surface

Downloads

TKHP series – High-Performance cable carriers for long travel lengths and high additional loads

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE^® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE^®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX^® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX^®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator

Product Configurator

Efficient, quick and complete configuration the result is your individual product with an excellent price-performance ratio
Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal

Product Configurator