-
-
gbFurther countries
Great Britain (EN)
Austria (DE)
India (EN)
to top 
Stay arrangement on each chain link (VS: fully-stayed)
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
hi
[mm]
|
hG
[mm]
|
Bk
[mm]
|
|---|---|---|
| 44 | 60 | Bi + 22 |
Bi
[mm]
| ||||||||
|---|---|---|---|---|---|---|---|---|
| 50 | 75 | 100 | 125 | 150 | 175 | 200 | 225 | 250 |
KR
[mm]
| ||||||
|---|---|---|---|---|---|---|
| 75 | 100 | 120 | 140 | 200 | 250 | 300 |
* indicated according to standard pitch
UA1665
RMA
150
140
2660
RVAO
The universal mounting brackets (UMB) are made from plastic and can be mounted from above, from below or on the face side.
Recommended tightening torque:
5 Nm for screws M5 - 8.8
Bi [mm] | nz |
|---|---|
50 | 2 x 3 |
75 | 2 x 5 |
100 | 2 x 7 |
125 | 2 x 9 |
150 | 2 x 11 |
175 | 2 x 13 |
F – fixed point
M – driver
U – universal mounting bracket
UMB
F
U
UMB
M
U
UMB
UMB
F
M
U
U
We recommend the use of strain reliefs before driver and fixed point.
The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.
Recommended tightening torque: 15 Nm for screws M8 - 8.8
Bi [mm] | nz |
|---|---|
50 | 2 x 4 |
75 | 2 x 6 |
100 | 2 x 8 |
125 | 2 x 10 |
150 | 2 x 12 |
175 | 2 x 14 |
200 | 2 x 16 |
225 | 2 x 18 |
250 | 2 x 20 |
F – fixed point
M – driver
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside
End connector
F
A
End connector
M
A
End connector
End connector
F
M
A
A
Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.
to TRAXLINE®From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.
to TOTALTRAX®Reliable unrolling and optimum gliding for long travel lengths
to support trays and guide channels
Configuration guidelines:
The latest TSUBAKI KABELSCHLEPP information material:
Our Quickfinder supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens outward
Opens inward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
Roller chain
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
