to top 
Modern 5-Axis portal milling machines efficiently produce high-precision workpieces. The process speed generated of up to 30 m/min. and more place high demands on the telescopic covers installed to protect the guideway. The proven synchronizer (harnesses) provide uniform movement of all boxes and ensure a collision-free process. Disruptive impact pulses are reliably prevented.
All cover boxes are uniformly moved during expansion and compression. The individual boxes move relative to one another, only at a differential speed. The force peaks generated when the telescopic cover boxes impact each other do not occur. The disruptive impact pulse of the boxes are eliminated.
High process speeds of up to 200 m/min. are possible.
The latest TSUBAKI KABELSCHLEPP information material:
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens outward
Opens inward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
Roller chain
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
