to top Arrow Up

MK0475 RD 01

Plastic stay RD 01 – frame stay with hinge in the inner radius

mk0475-rd-2_start.png

Properties

  • Plastic profile bars with hinge for light to medium loads.
    Assembly without screws.
  • Available customized in 8 mm grid.
  • Outside: release by turning by 90°.
  • Inside: swivable to both sides.
test
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 8 mm increments
Bi 24 – 280 mm in 8 mm width sections

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
t
[mm]
hi
[mm]
hG
[mm]
Bk
[mm]
BEF
[mm]
qk
[kg/m]
47.52839Bi + 17Bi + 170.79 – 3.03
Bi
[mm]
24324048566472808896
104112120128136144152160168176
184192200208216224232240248256
264272280
KR
[mm]
5575100130160200250300
Order example
Order code

MK0475

128

RD 01

100

1425

VS

Inner distribution

Divider systems

As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).
As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

The dividers are easily attached to the stay for applications with lateral acceleration and for applications laying on their side by simply turning the frame stay by 180°. The arresting cams click into place in the locking grids in the crossbars (Version B). The groove in the frame stay faces outwards.

Divider system TS0

without height separation
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A67.85
B1285.28

The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS0

Divider system TS1

with continuous height separation
Vers.
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A6207.852
B122085.282

The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS1

Divider system TS2

with partial height separation
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
B128*/245.2*/21.282

* for VR0

With grid distribution (8 mm grid). The dividers are fixed by the height separation, the complete divider system is movable in the cross section (version A) or fixed (version B).

Divider system TS2
Order example
Order code

TS2

A

3

K1

K4

34

38

VR1

VR3

End connectors

M0475 End connectors – plastic/steel (with strain relief)
M0475 End connectors – plastic/steel (with strain relief)
Bi
[mm]
X
[mm]
nz
40
17.53
56
21.54
80
17.56
104
198
128
19.59
152
17.511
192
18.514
M0475 End connectors – plastic/steel (with strain relief)
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside

Connection surface

I – connection surface inside

Order example
Order code

Plastic/steel

F

A

I

Plastic/steel

M

A

I

End connector

Plastic/steel

Plastic/steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

M0475 End connectors – plastic/steel
M0475 End connectors – plastic/steel
M0475 End connectors – plastic/steel
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
F – flange connection

Connection surface

I – connection surface inside
A – connection surface outside

Order example
Order code

Plastic/steel

F

A

A

Plastic/steel

M

U

 

End connector

Plastic/steel

Plastic/steel

Connection point

F

M

Connection type

A

U

Connection surface

A

Important information

We recommend the use of strain reliefs at the driver and fixed point.

Downloads

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Subject to change.
Contact
Please contact us:
Your contact: