to top Arrow Up

Steel Guide System (TKSG)

Guide channels in the modular system

guide-channel_steel-guide-system_start_02.png

Properties

  • Modular system with optimized design for long travel lengths.
  • Available in zinc plated sheet steel or stainless steel.
  • Easy installation.
Stay arrangement on every 2<sup>nd</sup> chain link

Zinc plated sheet steel / stainless steel

Stay arrangement on every chain link

Standard lengths 1000 / 2000 mm
Special lengths on request

Features
  • Especially suitable for cranes and applications with long travel lengths
  • Simple design for short installation times
  • No accumulation of dirt through open construction
  • Fast and easy installation thanks to pre-assembled sidebands and channel brackets
  • Complete system for screw-fitting
  • All components without welds

Versions

One-sided arrangement

For one-sided arrangement of the cable carrier, the cable carrier slides behind the fixed point on a continuous slide support with run-off bevels.

Steel Guide System One-sided arrangement Open design
Open design

Channel profile with and without slide supports incl. run-on bevels.

Dirt and liquids can drop through without restrictions.

Open design

Channel profile with and without slide supports incl. run-on bevels.

Dirt and liquids can drop through without restrictions.

Steel Guide System One-sided arrangement Open design
Opposite arrangement

For opposite arrangement, a slide support is also attached for bridging between the fixed point connections.

Steel Guide System Opposite arrangement Open design
Open design

Channel profile with and without slide supports incl. run-on bevels.

Dirt and liquids can drop through without restrictions.

Open design

Channel profile with and without slide supports incl. run-on bevels.

Dirt and liquids can drop through without restrictions.

Steel Guide System Opposite arrangement Open design

Dimensions

Steel Guide System Dimensions Front
Steel Guide System Dimensions Above

UNIFLEX Advanced

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
UA1555
Glide shoes 53 124 Bk + 9 BK + 139 2 b1 – 47 (FA) - 25 6.4 24 b1 – 69
Glide shoes 53 124 Bk + 9 BK + 139 2 b1 – 21 (FU) 22.5 22.5 5.5 24 b1 – 69
UA1665
Glide shoes 63.5 124 (KR < 200)
176 (KR ≥ 200)
Bk + 10 BK + 140 2 b1 – 52 (FA) - 30.5 8.4 24 b1 – 69
b1 – 66
Glide shoes 63.5 124 (KR < 200)
176 (KR ≥ 200)
Bk + 10 BK + 140 2 b1 – 19 (FU) 22.5 25 5.5 25 b1 – 69
b1 – 66

M series

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
M0650
Glide shoes 60.5 124 (KR < 200)
176 (KR ≥ 200)
Bk + 5 BK + 135 2 b1 – 24 (FU) 22.5 30.5 6.5 24
25
b1 – 69
b1 – 66
Offroad Glide shoes 63.5 124 (KR < 200)
176 (KR ≥ 200)
Bk + 5 BK + 135 2 b1 – 24 (FU) 22.5 30.5 6.5 24
25
b1 – 69
b1 – 66
M0950
Glide shoes 83.5 176 (KR < 200)
209 (KR ≥ 200)
Bk + 5 BK + 135 2 b1 – 19.5 (FU) 35 34.5 8.5 25 b1 – 66
b1 – 70
Offroad Glide shoes 86.5 176 (KR < 200)
209 (KR ≥ 200)
Bk + 5 BK + 135 2 b1 – 19.5 (FU) 35 34.5 8.5 25 b1 – 66
b1 – 70
M1250
Glide shoes 99.5 209 (KR < 300)
258 (KR ≥ 300)
Bk + 6 BK + 136 2 b1 – 23 (FU) 35 40.5 11 50 b1 – 70
b1 – 90
Offroad Glide shoes 103 209 (KR < 300)
258 (KR ≥ 300)
Bk + 6 BK + 136 2 b1 – 23 (FU) 35 40.5 11 50 b1 – 70
b1 – 90
M1300
Glide shoes 127.5 258 Bk + 6 BK + 136 2 b1 – 27 (FU) 35 30 11 50 b1 – 90

TKHD series

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
TKHD90
Glide shoes 127.5 258 Bk + 6 BK + 136 2 b1 – 96 (FAI) 40 25 12 50 b1 – 90

S/SX series

Typeh1
[mm]
hKA
[mm]
b1
[mm]
BKA
[mm]
s
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
T
[mm]
Y
[mm]
S/SX0650
Glide shoes 56 124 Bk + 10 BK + 140 2 b1 – 47 (FAI) 45 25 6.4 24 b1 – 69
S/SX1250
Offroad Glide shoes 103 209 (KR < 350)
258 (KR ≥ 350)
Bk + 12 BK + 140 2 b1 – 76 (FAI) 80 35 10.5 50 b1 – 100
S/SX1252
Offroad Glide shoes 103 209 (KR < 350)
258 (KR ≥ 350)
Bk + 12 BK + 142 2 b1 – 76 (FAI) 80 35 10.5 50 b1 – 100
Important information

The dimension A refers only to the connection holes.

Fixing Elements

Fixing with channel brackets

The channel brackets are mounted at the joins, ensuring precise connection of the joins in addition to fixing the channel to the substructure.

  • Optimum alignment of the joins
  • Reduced installation times
  • No welds
  • Minimum number of screw connections
  • Reliable fixing under rough conditions
  • High stability
Steel Guide System Fixing with channel brackets Front
Steel Guide System Fixing with channel brackets Side
Steel Guide System Fixing with channel brackets Above
s
[in mm]
D1
[in mm]
hKA
[in mm]
2
b1 + 11124
2
b1 + 13176
2
b1 + 13209
2
b1 + 13258
Important information

The sheet metal thickness “s” corresponds to the respective wall thickness “s” of the channel.

Important information

As a standard, the channel brackets included with the delivery are installed on all joins as well as at both ends of a channel. If you require more channel brackets beyond this, please state this when ordering.

Calculating C-profile length
C-profile length LP: LP = BKA + 50 mm
C-profile length LP rounded to 50 mm
Fixing kit (optional)

The delivery scope of the Steel Guide System does not include the optional joining clamp fixing kit.

Fixing kit

  1. C-rail (length depends on b1)
  2. T-head bolt M10/M12
  3. Hex nut
  4. Washer

Order

To order the Steel Guide System, please provide the following information:

  • Number of guide channels
  • Total length of channel
  • Support length LKA'
  • Ouer height of guide channel hKA
  • Inner width of guide channel b1
  • Material
  • Support height h1
  • Delivery (unmounted/mounted)
  • Fixing with or without C-profile

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories – Support trays and guide channels

Reliable unrolling and optimum gliding for long travel lengths

to support trays and guide channels

other accessories

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Quickfinder
Quickfinder
Close

Quickfinder

Our Quickfinder supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Subject to change.
Contact
Please contact us:
Your contact: