to top Arrow Up
ua1455_020_start.png
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 25 – 130 mm

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm]
Bk
[mm]
BEF
[mm]
qk
[kg/m]
263638.525385878103130*Bi + 16Bi + 190.71 – 1.12
KR
[mm]
526595125150180200225*

* on request

Order example
Order code

UA1455

020

78

150

1456

VS

Our technical support can provide help for gliding arrangements: postmaster@metool.com

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

For applications with lateral acceleration and lying on the side, divider with arresting cams are available.
The locking cams click into place in the locking grids in the crossbars (version B).

Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A3,575
B4/5**7,55,52.5

Number of dividers for design 020 depending on Bi
* not for design 020    
** 4 mm for Bi 38 – 103; 5 mm for Bi 25, 130

Vers.
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A3,520752
B4/5**207,55,52.52

* not for design 020    
** 4 mm for Bi 38 – 103; 5 mm for Bi 25, 130

Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A3,515102

* not for design 020

The dividers are fixed by the partitions, the complete divider system is movable in the cross section.

ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
15
10
20
15
25
20
30
25
35
30
40
35
45
40
55
50
65
60
75
70
Order example
Order code

TS3

A

2

K1

K4

34

38

VR1

VR3

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

UA1455 End Connector UMB
UA1455 End Connector UMB
UA1455 End Connector UMB
UA1455 End Connector UMB
Important information

Recommended tightening torque: 
5 Nm for screws M5 - 8.8

Bi
[mm]
nz
25
2
38
3
58
5
78
7
103
9
130
11
UA1455 End Connector UMB

The end connectors are optionally also available without strain relief comb (1 on each side). Please state when ordering.


UA1455 End Connector UMB
Order example
Order code

End connector

Connection point

Connection type

UA1455 End Connector
UA1455 End Connector
UA1455 End Connector
Important information

Recommended tightening torque: 
6 Nm for screws M6 - 8.8

Bi
[mm]
nz
25
2 x 2
38
2 x 3
58
2 x 4
78
2 x 6
103
2 x 8
130
2 x 10
UA1455 End Connector

The end connectors are optionally also available without strain relief comb (except Bi 25). Please state when ordering.


UA1455 End Connector
Order example
Order code

End connector

Connection point

Connection type

Downloads

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories – Support trays and guide channels

Reliable unrolling and optimum gliding for long travel lengths

to support trays and guide channels

other accessories

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Quickfinder
Quickfinder
Close

Quickfinder

Our Quickfinder supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Subject to change.
Contact
Please contact us:
Your contact: