The data for the total height are guide values. The actual height depends on the cable diameter and the cable structure, among other things.
In practical operation, tensile forces occur in both cable directions. Clamps therefore have to transmit high tensile forces in the respective direction.
In contrast to standard commercial clamps, the LineFix® foot geometry ensures transmission of extremely high tensile forces equally in both directions. The catch fixes the foot securely in the C-profile when it is bolted on, preventing the crossbar from tipping out during load application, regardless of the direction of forces or installation.
The curved support ribs fix the cables very gently and reliably.
For cable carriers with upper run gliding on the lower run, the system height of the strain relief must not be higher than the chain link height!
Type | Designation | Material no. for one complete LineFix® | Material no. for one complete stainless steel LineFix® (ER 1S) | for cable Ø [mm] | No. of cables | Width [mm] | Total height with max. cable diam. incl. C-rail* [mm] | |
---|---|---|---|---|---|---|---|---|
Single clamp | ||||||||
LF 12-1 | 13630 | 13731 | > 6.0 – 12.0 | 1 | 16 | 55 | ||
LF 14-1 | 13631 | 13732 | > 12.0 – 14.0 | 1 | 18 | 52 | ||
LF 16-1 | 13632 | 13733 | > 14.0 – 16.0 | 1 | 20 | 54 | ||
LF 18-1 | 13633 | 13734 | > 16.0 – 18.0 | 1 | 22 | 56 | ||
LF 20-1 | 13634 | 13735 | > 18.0 – 20.0 | 1 | 24 | 59 | ||
LF 22-1 | 13635 | 13736 | > 20.0 – 22.0 | 1 | 26 | 61 | ||
LF 26-1 | 13636 | 13737 | > 22.0 – 26.0 | 1 | 30 | 70 | ||
LF 30-1 | 13637 | 13738 | > 26.0 – 30.0 | 1 | 34 | 74 | ||
LF 34-1 | 13638 | 13739 | > 30.0 – 34.0 | 1 | 38 | 78 | ||
LF 38-1 | 13639 | 13740 | > 34.0 – 38.0 | 1 | 42 | 82 | ||
LF 42-1 | 13640 | 13741 | > 38.0 – 42.0 | 1 | 46 | 91 | ||
Double clamp | ||||||||
LF 12-2 | 13641 | 13742 | > 6.0 – 12.0 | 2 | 16 | 73 | ||
LF 14-2 | 13642 | 17343 | > 12.0 – 14.0 | 2 | 18 | 74 | ||
LF 16-2 | 13643 | 13744 | > 14.0 – 16.0 | 2 | 20 | 82 | ||
LF 18-2 | 13644 | 13745 | > 16.0 – 18.0 | 2 | 22 | 86 | ||
LF 20-2 | 13645 | 13746 | > 18.0 – 20.0 | 2 | 24 | 91 | ||
LF 22-2 | 13646 | 13747 | > 20.0 – 22.0 | 2 | 26 | 95 | ||
LF 26-2 | 13647 | 13748 | > 22.0 – 26.0 | 2 | 30 | 108 | ||
LF 30-2 | 13648 | 13749 | > 26.0 – 30.0 | 2 | 34 | 121 | ||
LF 34-2 | 13649 | 13750 | > 30.0 – 34.0 | 2 | 38 | 129 | ||
Triple clamp | ||||||||
LF 12-3 | 13650 | 13751 | > 6.0 – 12.0 | 3 | 16 | 98 | ||
LF 14-3 | 13651 | 13752 | > 12.0 – 14.0 | 3 | 18 | 98 | ||
LF 16-3 | 13652 | 13753 | > 14.0 – 16.0 | 3 | 20 | 105 | ||
LF 18-3 | 13653 | 13754 | > 16.0 – 18.0 | 3 | 22 | 111 | ||
LF 20-3 | 13654 | 13755 | > 18.0 – 20.0 | 3 | 24 | 118 | ||
LF 22-3 | 13655 | 13756 | > 20.0 – 22.0 | 3 | 26 | 130 | ||
* Item no. 3934
Additional sizes on request.
Recommended tightening torque: max. 3 Nm for electric cables suitable for cable carriers.
The standard sets of LineFix® clamps in size LF/LFX 12 offer even more flexibility and mounting options due to the extension with the new double and counter jaws. Optimized for different cable diameters and individually combinable heights, almost all requirements can be implemented without any problems.
Double jaw
LD12 d6s12
Double jaw
LD12 d6d6
Counter jaw
LG12 d6
Material no. for one complete LineFix® | Material no. for one complete stainless steel LineFix® (ER 1S) | cable diam. Ø A [mm] | cable diam. Ø B [mm] | No. of cables | Width [mm] | Total height with max. cable diam. incl. C-profile* [mm] | |
---|---|---|---|---|---|---|---|
1 | 13757 | 13773 | 3-6 (2x) | - | 2 | 16 | 51 |
2 | 13758 | 13774 | 3-6 (4x) | - | 4 | 16 | 70 |
3 | 13759 | 13775 | 3-6 (2x) | 6-12 (1x) | 3 | 16 | 74 |
4 | 13760 | 13776 | 3-6 (2x) | 6-12 (1x) | 3 | 16 | 70 |
5 | 13761 | 13777 | 3-6 (6x) | - | 6 | 16 | 89 |
6 | 13762 | 13778 | 3-6 (4x) | 6-12 (1x) | 5 | 16 | 94 |
7 | 13763 | 13779 | 3-6 (4x) | 6-12 (1x) | 5 | 16 | 94 |
8 | 13764 | 13780 | 3-6 (2x) | 6-12 (2x) | 4 | 16 | 98 |
9 | 13765 | 13781 | 3-6 (8x) | - | 8 | 16 | 98 |
10 | 13766 | 13782 | 3-6 (6x) | 6-12 (1x) | 7 | 16 | 103 |
11 | 13767 | 13783 | 3-6 (6x) | 6-12 (1x) | 7 | 16 | 103 |
12 | 13768 | 13784 | 3-6 (6x) | 6-12 (1x) | 7 | 16 | 103 |
13 | 13769 | 13785 | 3-6 (6x) | 6-12 (1x) | 7 | 16 | 98 |
14 | 13770 | 13786 | 3-6 (4x) | 6-12 (2x) | 6 | 16 | 103 |
15 | 13771 | 13787 | 3-6 (4x) | 6-12 (2x) | 6 | 16 | 103 |
16 | 13772 | 13788 | 3-6 (4x) | 6-12 (2x) | 6 | 16 | 102 |
* Material-Nr. 3934
Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.
to TRAXLINE®From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.
to TOTALTRAX®Reliable unrolling and optimum gliding for long travel lengths
to Support traysFor optimum placement with dynamic use of cables
to Strain relief devicesConfiguration guidelines:
The latest TSUBAKI KABELSCHLEPP information material:
Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.