to top Arrow Up

TKA30.060

Stay variant 060 – covered on both sides with inside detachable cover

tka30_060_start.png

Properties

  • Plastic cover for rough environmental conditions with dirt, chips or spray water.
  • Fully detachable on one side in any position.
  • Inside: very quick release.
test
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 15 – 65 mm

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
t
[mm]
hi
[mm]
hG
[mm]
Bk
[mm]
qk
[kg/m]
30.520.528.5Bi + 130.48 – 0.76
Bi
[mm]
152025385065
KR
[mm]
557595125145180
Order example
Order code

TKA30

060

50

125

915

VS

Our technical support can provide help for gliding arrangements: technik@kabelschlepp.de

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

The dividers are easily attached to the stay for applications with transverse accelerations and for applications laying on the side by simply turning them.
The locking cams click into place in the locking grids in the covers (Version B).

Divider system TS0

without height separation
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A3.575
B862
Bi [mm]
aT min [mm]
15
7.5
20
8
25
8.5
38
9
50
9
65
8.5
Divider system TS0

Divider system TS1

with continuous height separation
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A3.5752
B8622
Bi [mm]
aT min [mm]
15
7.5
20
8
25
8.5
38
9
50
9
65
8.5
Divider system TS1
Order example
Order code

TS1

A

3

VD0

VD1

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

TKA30 Universal-Anschlusselemente UMB – Kunststoff (Standard)
TKA30 Universal-Anschlusselemente UMB – Kunststoff (Standard)
Important information

Recommended tightening torque: 3 Nm for cheese-head screws ISO 4762 - M4 x 12

TKA30 Universal-Anschlusselemente UMB – Kunststoff (Standard)

The end connectors are also available as an option without cover sheets. Please state when ordering.

TKA30 Universal-Anschlusselemente UMB – Kunststoff (Standard)
Connection point

F – fixed point
M – driver

Connection type

U – universal end connector

Order example
Order code

UMB

F

U

UMB

M

U

End connector

UMB

UMB

Connection point

F

M

Connection type

U

U

Important information

We recommend the use of strain reliefs at the driver and fixed point.

Downloads

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Subject to change.
Contact
Please contact us:
Your contact: