to top Arrow Up
TSUBAKI
India
Global
KABELSCHLEPP

Standard Channel

Sheet steel guide channels

guide-channel_standard-channel_start_02.png

Properties

  • Simple version with customized fixing options.
  • Zinc plated sheet steel or stainless steel.
  • Standard lengths.
test
Stay arrangement on every 2<sup>nd</sup> chain link

Zinc plated sheet steel / stainless steel

Stay arrangement on every chain link

Standard lengths 2000 / 3000 mm
Special lengths on request

All pictographs
Features
  • Universal installation – the channel side walls do not require aligning as there are no single side walls
  • Large support widths through sturdy U-design
  • Optionally available as a corrosion resistant, sea water resistant version
  • Easy fixing options:
    • standard angle brackets for screwing
    • welded on directly on site
    • different fixing variants
Individual solutions

We can also manufacture customized sheet steel guide channels for your application, taking into account virtually any request regarding customized shapes and fixing options.

Versions

One-sided arrangement

For one-sided arrangement of the cable carrier, the cable carrier slides behind the fixed point on a continuous slide support with run-on bevels.

Closed design

One part channel closed at the bottom and one part slide support with run-on bevels.

Open design

One part channel closed at the bottom and divided slide support with run-on bevels.

Dirt and liquids can drop through without restrictions.

Closed design

One part channel closed at the bottom and one part slide support with run-on bevels.

Open design

One part channel closed at the bottom and divided slide support with run-on bevels.

Dirt and liquids can drop through without restrictions.

Opposite arrangement

For opposite arrangement, a slide support is also attached for bridging between the fixed point connections.

Closed design

One part channel closed at the bottom and one part slide support with run-on bevels.

Open design

One part channel closed at the bottom and divided slide support with run-on bevels.

Dirt and liquids can drop through without restrictions.

Closed design

One part channel closed at the bottom and one part slide support with run-on bevels.

Open design

One part channel closed at the bottom and divided slide support with run-on bevels.

Dirt and liquids can drop through without restrictions.

Important information

A special slide support can be adhered to reduce sliding resistance and abrasion between cable carrier and support. We recommend the use of special slide supports for velocities > 0.5 m/s and for frequent move cycles.

Dimensions

Standard channel dimensions front
Standard channel dimensions above
Important information

From hKA ≥ 200 mm, the guide channel flanks are additionally stabilized with alignment flanges or with connecting flanges.

Important information

The dimension y refers only to open guide channel versions.

UNIFLEX Advanced series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
UA1455
– 36 70 (KR < 100)
125 (KR ≥ 100) 		Bk + 4 BK + 24 2 b1 – 34 (FA-A) – 40 6.2 30 b1 – 65
– 36 70 (KR < 100)
125 (KR ≥ 100) 		Bk + 4 BK + 24 2 b1 – 34.5 (FA-L) – 40 6.2 30 b1 – 65
– 36 70 (KR < 100)
125 (KR ≥ 100) 		Bk + 7 BK + 24 2 b1 – 13.5 (FU) – 50 5.3 30 b1 – 40
Glide shoes 38.5 70 (KR < 100)
125 (KR ≥ 100) 		Bk + 7 BK + 27 2 b1 – 37 (FA-A) – 40 6.2 30 b1 – 65
Glide shoes 38.5 70 (KR < 100)
125 (KR ≥ 100) 		Bk + 7 BK + 27 2 b1 – 37.5 (FA-L) – 40 6.2 30 b1 – 65
Glide shoes 38.5 70 (KR < 100)
125 (KR ≥ 100) 		Bk + 7 BK + 27 2 b1 – 16.5 (FU) – 50 5.3 30 b1 – 40
UA1555
– 50 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 43 (FA) – 50 6.5 30 b1 – 85
– 50 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 16 (FU) 22.5 50 5.3 30 b1 – 40
Glide shoes 53 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 9 BK + 29 2 b1 – 47 (FA) – 50 6.5 30 b1 – 85
Glide shoes 53 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 9 BK + 29 2 b1 – 21 (FU) 22.5 50 5.3 30 b1 – 40
UA1665
– 60 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 47 (FA) – 60 8.5 30 b1 – 85
– 60 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 14 (FU) 22.5 60 5.3 30 b1 – 40
Glide shoes 63 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 10 BK + 30 2 b1 – 52 (FA) – 60 8.5 30 b1 – 85
Glide shoes 63 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 10 BK + 30 2 b1 – 19 (FU) 22.5 60 5.3 30 b1 – 40
UA1775
– 77 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 19.6 (FU) 20 60 8.5 30 b1 – 65
Glide shoes 81.5 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 10 BK + 30 2 b1 – 24.6 (FU) 20 60 8.5 30 b1 – 65
UA1995
– 110 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 6 BK + 26 2 b1 – 28 (FU) 35 60 8.5 30 b1 – 60
Glide shoes 116.5 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 11 BK + 31 2 b1 – 28 (FU) 35 60 8.5 30 b1 – 60

The designations for dimension A refer to the version of the cable carrier connection.

*   Dimension T for leg length support brackets (guiding channel open type for Bk ≥ 90 mm).
**   Dimension Y for guiding channel open for Bk ≥ 90 mm).

TKK39 series

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
TKK39
– 50 117 Bk + 5 BK + 25 2 b1 – 43 24 40 5.2 30 b1 – 40

The designations for dimension A refer to the version of the cable carrier connection.

K series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

When using aluminum hole stays, slide discs have to be placed on the side tabs between cable carrier and channel wall for spacing.

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
K0650
– 57.5 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 19 (FU) 40 30 6.5 30 b1 – 65
Slide discs 57.5 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 13 BK + 33 2 b1 – 27 (FA) 40 30 6.5 30 b1 – 65
Slide discs 57.5 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 13 BK + 33 2 b1 – 27 (FU) 40 30 6.5 30 b1 – 65
K0900
– 78.5 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 20.5 (FU) 50 30 6.5 30 b1 – 65
Slide discs 78.5 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 19 BK + 39 2 b1 – 34 (FA) 50 30 6.5 30 b1 – 75
Slide discs 78.5 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 19 BK + 39 2 b1 – 34.5 (FU) 50 30 6.5 30 b1 – 75

The designations for dimension A refer to the version of the cable carrier connection.

M series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
For type M0320 we recommend aluminum guide channels.

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
M0475
Glide shoes 41.5 70 (KR < 100)
125 (KR ≥ 100) 		Bk + 4 BK + 24 2 b1 – 39 (FI) 24 30 6.5 30 b1 – 55
M0650
Glide shoes 60.6 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 55 (FAI) 30 30 6.5 30 b1 – 70
Glide shoes 60.6 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 24 (FU) 22.5 30 6.5 30 b1 – 70
Offroad Glide shoes 62.2 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 55 (FAI) 30 30 6.5 30 b1 – 65
Offroad Glide shoes 62.2 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 24 (FU) 22.5 30 6.5 30 b1 – 65
M0950
Glide shoes 83.5 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 70 (FAI) 40 30 8.5 30 b1 – 100
Glide shoes 83.5 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 19.5 (FU) 35 30 8.5 30 b1 – 60
Offroad Glide shoes 86 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 70 (FAI) 40 30 8.5 30 b1 – 100
Offroad Glide shoes 86 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 19.5 (FU) 35 30 8.5 30 b1 – 60
M1250
Glide shoes 99.5 200 (KR < 300)
400 (KR ≥ 300) 		Bk + 6 BK + 26 3 b1 – 83 (FAI) 50 30 10.5 30 b1 – 125
Glide shoes 99.5 200 (KR < 300)
400 (KR ≥ 300) 		Bk + 6 BK + 26 3 b1 – 23 (FU) 35 30 11 30 b1 – 65
Offroad Glide shoes 103 200 (KR < 300)
400 (KR ≥ 300) 		Bk + 6 BK + 26 3 b1 – 83 (FAI) 50 30 10.5 30 b1 – 125
Offroad Glide shoes 103 200 (KR < 300)
400 (KR ≥ 300) 		Bk + 6 BK + 26 3 b1 – 23 (FU) 35 30 11 30 b1 – 65
M1300
– 120 250 (KR < 320)
400 (KR ≥ 320) 		Bk + 6 BK + 26 3 b1 – 27 (FU) 35 30 11 40 b1 – 75
Glide shoes 127 250 (KR < 320)
400 (KR ≥ 320) 		Bk + 6 BK + 26 3 b1 – 27 (FU) 35 30 11 40 b1 – 75

The designations for dimension A refer to the version of the cable carrier connection.

XL | XLT series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
XL1650
– 140 300 (KR < 350)
400 (KR ≥ 350) 		Bk + 6 BK + 26 3 b1 – 99 (FAI) 50 40 13.5 40 b1 – 130
Glide shoes 147 300 (KR < 350)
400 (KR ≥ 350) 		Bk + 6 BK + 26 3 b1 – 99 (FAI) 50 40 13.5 40 b1 – 130

The designations for dimension A refer to the version of the cable carrier connection.

QUANTUM® series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
Q040
– 40 70 (KR < 110)
125 (KR ≥ 110) 		Bk + 4 BK + 24 2 b1 – 18 (FU) 14 30 6.6 40 b1 – 35
Q060
Glide shoes 66 117 (KR < 190)
200 (KR ≥ 190) 		Bk + 9 BK + 29 2 b1 – 29 (FU) 29 30 6.6 40 b1 – 45
Q080
Glide shoes 88 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 13 BK + 33 2 b1 – 38 (FU) 35 40 9 40 b1 – 70
Q100
Glide shoes 108 250 (KR < 300)
400 (KR ≥ 300) 		Bk + 13 BK + 33 2 b1 – 43 (FU) 35 40 11 40 b1 – 105

The designations for dimension A refer to the version of the cable carrier connection.

TKA series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
TKA30
– 29.15 70 (KR < 95)
125 (KR ≥ 95) 		Bk + 4 BK + 24 2 b1 – 31 (FU) – 50 6.5 – –
TKA38
– 36.75 70 (KR < 95)
125 (KR ≥ 95) 		Bk + 4 BK + 24 2 b1 – 10.5 (FU) – 50 4.5 25 b1 – 55
TKA45
– 51 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 28 2 b1 – 12 (FU) 15 50 5.5 25 b1 – 60
TKA55
– 65 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 28 2 b1 – 16 (FU) 15 60 5.5 25 b1 – 75

The designations for dimension A refer to the version of the cable carrier connection.

UAT series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
UAT1555
– 69 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 15 (FU) 25 40 5.5 30 b1 – 80
– 69 117 (KR < 200)
200 (KR ≥ 200) 		Bk + 5 BK + 25 2 b1 – 15 (FU) 40 40 5.5 30 b1 – 80

The designations for dimension A refer to the version of the cable carrier connection.

S/SX series | S/SX tubes

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Typeh1
[mm] 		hKA
[mm] 		b1
[mm] 		BKA
[mm] 		s
[mm] 		A
[mm] 		B
[mm] 		C
[mm] 		D
[mm] 		T
[mm] 		Y
[mm]
S/SX 0650
Glide shoes 56 125 (KR < 155)
200 (KR ≥ 155) 		Bk + 10 BK + 30 2 b1 – 47 45 15 6.4 30 b1 – 70
S/SX 0950
Glide shoes 73 150 (KR < 200)
300 (KR ≥ 200) 		Bk + 14 BK + 34 2 b1 – 77 65 20 8.4 30 b1 – 100
S/SX 1250
Glide shoes 99 200 (KR < 300)
400 (KR ≥ 300) 		Bk + 12 BK + 32 3 b1 – 76 80 25 10.5 30 b1 – 100
Offroad Glide shoes 104 200 (KR < 300)
400 (KR ≥ 300) 		Bk + 12 BK + 32 3 b1 – 76 80 25 10.5 50 b1 – 100
S/SX 1800
Glide shoes 155 300 (KR < 435)
500 (KR ≥ 435) 		Bk + 17 BK + 37 3 b1 – 94 115 30 13 50 b1 – 120

The designations for dimension A refer to the version of the cable carrier connection.

Guide channel required

Our engineers will be happy to help with your project planning – please contact us.

Important information

From hKA ≥ 200 mm, the guide channel flanks are additionally stabilized with alignment flanges or with connecting flanges.

Important information

The dimension y refers only to open guide channel versions.

Fixing Elements

Standard fixing with angle brackets (standard)

The angle brackets are mounted at the joins, ensuring precise connection of the joint areas in addition to fixing the channel to the substructure.

  • Optimum alignment of the joins
  • Reduced installation times
  • Minimum number of screw connections
  • Reliable fixing, even under rough conditions
Standard channel Fixing angle Brackets Front
Standard channel Fixing angle Brackets Side
Standard channel Fixing angle Brackets Above
Standard channel Fixing angle Brackets Perspective
s
[in mm]		b2
[in mm]		X1
[in mm]
2
b1 + 54104
3
b1 + 56106
Important information

The figure shows an open channel version

Important information

The sheet metal thickness “s” corresponds to the respective wall thickness “s” of the channel.

Important information

As a standard, the angle brackets included with the delivery are installed on all joins as well as at both ends of a channel. If you require more angle brackets beyond this, please state this when ordering.

Important information

The length of the C-rail depends on the channel width and is supplied in standard lengths. Please contact us if you require custom lengths.

Calculating C-profile length
C-profile length LP: LP = b1 + 106
C-profile length LP rounded to 50 mm
Fixing kit (optional)

The delivery scope of the standard channel does not include the optional joining clamp fixing kit. 

Fixing kit

  1. C-rail (length depends on b1)
  2. Hexagon socket screws
  3. Slide nut
Fixing with alignment flanges and floor fixing plate

The fixing tabs are mounted at the joins, ensuring precise connection of the joint areas in addition to fixing the channel to the substructure.

  • Optimum alignment of the joins
  • Reduced installation times
  • Minimum number of screw connections
  • Push-to-connect system
Standard channel fixing alignment flanges
Calculating C-profile length
C-profile length LP: LP = b1 + 105
C-profile length LP rounded to 50 mm
Fixing with floor fixing bracket

The floor fixing brackets are mounted at the joins, ensuring precise connection of the joint areas in addition to fixing the channel to the substructure.

  • Easy alignment of the joins
  • Reduced installation times
  • Minimized number of screw connections
Standard channel fixing floor fixing bracket
Calculating C-profile length
C-profile length LP: LP = b1 + 66
C-profile length LP rounded to 50 mm
Fixing with lateral connecting flange

The unsupported connecting flanges are mounted at the joins, ensuring precise connection of the joint areas in addition to fixing the channel to the substructure.

  • Unsupported joins without support (self supporting) through flange connections
  • Reliable, secure connection even with extreme vibrations or in un­supported channel arrangement
Standard channel fixing lateral connection flange

Order

To order the standard channel, please provide the following information: 

  • Number of guide channels
  • Material
  • Version of guide channel
  • Part length
  • Total length of channel
  • Slide support length LKA'
  • Floor fixing
  • Join connection
  • Slide support height h1
  • Outer height of guide channel hKA
  • inner width of guide channel b1

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
Product Configurator
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
CADenas
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Glossary
Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Technical information
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

download as PDF file
request the printed version of our catalogs and brochures
Product filter
Product filter
Close

Product filter

Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Product filter
Product Configurator
Product Configurator
CADenas
CADenas
Glossary
Glossary
Technical information
Technical information
Literature
Literature
Product filter
Product filter
Subject to change.
Contact
Please contact us:
Your contact:
Email: info@kabelschlepp.de