to top Arrow Up

TKR0280.030

Stay variant 030 – with externally opening and detachable crossbars

tkr0280_030_start.png

Properties

  • Low-vibration plastic frame with particularly long service life thanks to molded chain links.
  • Swivable and detachable on one side in any position.
  • Outside: Swivable and detachable
  • Inside: detachable
test
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 50 – 200 mm

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for odd number of chain links
t
[mm]
hi
[mm]
hG
[mm]
Bk
[mm]
qk
[kg/m]
285266Bi + 302.00 – 3.20
Bi
[mm]
50627587100125150200
KR
[mm]
75100150200
Order example
Order code

TKR0280

100

030

150

840

VS

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

Fixable dividers are available for applications with lateral accelerations and for applications lying on the side.
The arresting cams click into place in the locking grids in the crossbars (version B).

Divider system TS0

without height separation
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A385.6
B85.64
Bi [mm]
aT min [mm]
50
5
62
7
75
5.5
87
3.5
100
6
125
6.5
150
7
200
4
Divider system TS0

Divider system TS1

with continuous height separation
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A385.62
B85.642
Bi [mm]
aT min [mm]
50
5
62
7
75
5.5
87
3.5
100
6
125
6.5
150
7
200
4
Divider system TS1

Divider system TS3

with height separation made of aluminum partitions
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A326202
B282242
Bi [mm]
aT min [mm]
50
5
62
7
75
5.5
87
3.5
100
6
125
6.5
150
7
200
4

The dividers are fixed by the partitions, the complete divider system is movable in the cross section.

Divider system TS3
Important information

Aluminum section subdivisions are only available with ax > 26 mm.

Order example
Order code

TS0

A

3

VD0

VD1

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

TKR0280 UMB end connectors UMB – plastic
TKR0280 UMB end connectors UMB – plastic
TKR0280 UMB end connectors UMB – plastic
Important information

Recommended tightening torque:
0,6 Nm for screws M4

Bi
[mm]
BEF
[mm]
nz
50
802 x 3
62
92-
75
1052 x 5
87
117-
100
1302 x 7
125
1552 x 9
150
1802 x 11
200
230-
TKR0280 UMB end connectors UMB – plastic
Connection point

F – fixed point
M – driver

Connection type

U – universal mounting bracket

Order example
Order code

UMB

F

U

UMB

M

U

End connector

UMB

UMB

Connection point

F

M

Connection type

U

U

Important information

We recommend the use of strain reliefs at the driver and fixed point.

Downloads

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Subject to change.
Contact
Please contact us:
Your contact: