TKR0280.030

Stay variant 030 – with externally opening and detachable crossbars

Properties

Low-vibration plastic frame with particularly long service life thanks to molded chain links.
Swivable and detachable on one side in any position.
Outside: Swivable and detachable
Inside: detachable

Stay arrangement on each chain link (VS: fully-stayed)

B_i 50 – 200 mm

All pictographs

Dimensions

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length

Cable carrier length L_K: L_K≈ L_S/2 + L_B

Cable carrier length L_k rounded to pitch t

h_i [mm]	h_G [mm]	B_k [mm]	q_k [kg/m]
52	66	B_i + 30	2.00 – 3.20

B_i [mm]
50	62	75	87	100	125	150	200

KR [mm]
75	100	150	200

Order example

TKR0280

Type

100

B_i [mm]

030

Stay variant

150

KR [mm]

840

L_k [mm]

Stay arrangement

Inner distribution

Divider systems

The divider system is mounted on every 2^nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

Fixable dividers are available for applications with lateral accelerations and for applications lying on the side.
The arresting cams click into place in the locking grids in the crossbars (version B).

Divider system TS0

without height separation

Vers.	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x grid} [mm]	n_{T min}
A	3	8	5.6	–	–
B	A	8	5.6	4	–

B_i [mm]

a_{T min} [mm]

5.5

3.5

100

125

6.5

150

200

Divider system TS1

with continuous height separation

Vers.	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x grid} [mm]	n_{T min}
A	3	8	5.6	–	2
B	A	8	5.6	4	2

B_i [mm]

a_{T min} [mm]

5.5

3.5

100

125

6.5

150

200

Divider system TS3

with height separation made of aluminum partitions

Vers.	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x grid} [mm]	n_{T min}
A	3	26	20	–	2
B	A	28	22	4	2

B_i [mm]

a_{T min} [mm]

5.5

3.5

100

125

6.5

150

200

The dividers are fixed by the partitions, the complete divider system is movable in the cross section.

Aluminum section subdivisions are only available with a_x > 26 mm.

Order example

TS0

Divider system

Version

n_T

VD0

VD1

Height separation

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [n_T ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [a_T/a_x] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

UMB end connectors UMB – plastic

The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom or face on.

Recommended tightening torque:
0,6 Nm for screws M4

B_i [mm]	B_EF [mm]	n_z
50	80	2 x 3
62	92	-
75	105	2 x 5
87	117	-
100	130	2 x 7
125	155	2 x 9
150	180	2 x 11
200	230	-

TKR0280 UMB end connectors UMB – plastic

Connection point

F – fixed point
M – driver

Connection type

U – universal mounting bracket

Order example

UMB

End connector

Connection point

Connection type

End connector

UMB

Connection point

Connection type

We recommend the use of strain reliefs before driver and fixed point.

Downloads

TKR series – Extremely quiet and low-vibration for highly dynamic applications

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE^® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE^®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX^® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX^®

Accessories – Support trays and guide channels

Reliable unrolling and optimum gliding for long travel lengths

to support trays and guide channels

other accessories

Services

Product Configurator

Product Configurator

Efficient, quick and complete configuration the result is your individual product with an excellent price-performance ratio
Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal

Product Configurator

CADenas

CADenas

Decrease your engineering times
Accelerate your design processes
Configure with original data directly from the manufacturer
Providing 3D component models in a variety of CAD formats

CADenas

Glossary

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Glossary

Technical information

Technical information

Configuration guidelines:

Selecting a suitable cable carrier
Placement guidelines for cables and hoses
Installation variants

Technical information

Literature

Literature

The latest TSUBAKI KABELSCHLEPP information material:

download as PDF file

request the printed version of our catalogs and brochures

Quickfinder

Quickfinder

Our Quickfinder supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Quickfinder

Product Configurator

CADenas

Glossary

Technical information

Literature

Quickfinder