to top Arrow Up

EasyTrax® series

Extremely fast cable laying thanks to easy cable insertion

  1. Sturdy 2-component design: solid chain body, flexible film hinge
  2. Plastic chain links
  3. Extensive unsupported length
  4. Inside space is gentle on the cables – no interfering edges
  5. Very quiet through integrated noise damping
  6. Inside or outside openable
  7. Dividers for cable separation
  8. Single-part end connectors with integratable strain relief

Features

  • Very fast cable laying by simply pressing in the cables
  • Very high fill level through lateral swivelling of the lamella – lamellae do not swivel into the cable space
  • Each chain link consists of two different materials:
    – Hard chain body made of glass-fibre reinforced material
    – Lamellae with flexible film hinge made of special elastic plastic
  • Sturdy cable carrier design
  • High torsional rigidity
  • Extensive unsupported length
  • Very quiet through integrated noise damping
Long travel length
Opens outward
Opens inward
Sliding dividers
Clean room suitable
Quiet running/low noise
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
EasyTrax series Features 1

Fast and easy installation of cables

EasyTrax series Features 2

Very high fill level

EasyTrax series Features 3

High side stability

EasyTrax series Features 4

Divider systems for reliable cable separation

Cable carrier design

Solid plastic cable carriers: chain links and end connectors made of plastic

Each chain link consists of two different materials:

  • Hard cable carrier body made of glass fiber-reinforced material
  • Flexible lamellae made of elastic plastic
EasyTrax Carrier construction

The two-component technology

The two-component technology of the EasyTrax® combines two seemingly incompatible features: stability and flexibility.
Cable carriers need to be extremely sturdy, with extensive unsupported length. At the same time, cables need to be inserted easily for fast cable laying. The EasyTrax® meets these requirements thanks to its innovative design and material combination of a hard cable carrier body made from fiber glass reinforced material and lamellae made of elastic plastic.

EasyTrax series 2K-Technology

Comparison of dimensions

Manufacturerhi
[mm]
hG
[mm]
t
[mm]
Identical connection hole pattern
ET03201825.532 yes
Competitive product192530.5 yes

Comparison of bending moment

Comparison of bending strength

Load diagram

for unsupported length depending on additional load

EasyTrax Load diagram

Advantages over competitive product

  • 4 times bigger additional load compared to competitive product
  • Double unsupported length compared to competitive product
  • Faster cable laying at a higher utilization faktor
  • Low noise operation due to internal damping system
  • High side stability through locking in the stroke system
  • Dividers can be used for cable separation

Types

EasyTrax series ET0115

ET0115

Inner height [hi]:
4.6 mm
Inner width [Bi]:
7 mm
Pitch [t]:
11.5 mm
Bending [KR]:
10 mm
more details
EasyTrax series ET0250

ET0250

Inner height [hi]:
16.5 mm
Inner widths [Bi]:
30 – 50 mm
Pitch [t]:
25 mm
Bending [KR]:
28 – 100 mm
more details
EasyTrax series ET0320

ET0320

Inner height [hi]:
18 mm
Inner widths [Bi]:
15 – 65 mm
Pitch [t]:
32 mm
Bending [KR]:
28 – 125 mm
more details
EasyTrax series ET1455

ET1455

Inner height [hi]:
25 mm
Inner widths [Bi]:
25 – 78 mm
Pitch [t]:
45.5 mm
Bending [KR]:
52 – 200 mm
more details
Type
hi
[mm]
Bi
[mm]
t
[mm]
KR
[mm]
ET0115 4.6 7 11.5 10
ET0250 16.5 30 – 50 25 28 – 100
ET0320 18 15 – 65 32 28 – 125
ET1455 25 25 – 78 45.5 52 – 200

Downloads

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Product filter
Product filter
Close

Product filter

Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Subject to change.
Contact
Please contact us:
Your contact: