TKP35.030

Stay variant 030 – with outside opening and detachable crossbars

Properties

Weight-optimised plastic frame with particularly high torsional rigidity.
Can be opened at any position on both sides.
Outside: opening and detachable crossbars.

Stay arrangement on each chain link (VS: fully-stayed)

B_i 16 – 50 mm

All pictographs

Dimensions

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length

Cable carrier length L_K: L_K≈ L_S/2 + L_B

Cable carrier length L_k rounded to pitch t

t [mm]	h_i [mm]	h_G [mm]	B_k [mm]	q_k [kg/m]
35	32	40	B_i + 12^*	0.50 – 0.80

B_i [mm]
16	25	38	50

KR [mm]
48	60	75	100	125

* For B_i 16 = B_i + 10

Order example

TKP35

Type

030

Stay variant

B_i [mm]

100

KR [mm]

700

L_k [mm]

Stay arrangement

Inner distribution

Divider systems

The divider system is mounted on every 2^nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation. The arresting cams snap into the catch profiles in the covers (version B).

Divider system TS0

without height separation

Vers.	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x grid} [mm]	n_{T min}
A	3	6	4	–	–
B	4,5* / 5	6	4	2	–

^* only B_i 25

Divider system TS1

with continuous height separation

Vers.	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x grid} [mm]	n_{T min}
A	3	6	4	–	2
B	4,5* / 5	6	4	2	2

^* only B_i 25

The dividers can be moved in the cross section.

Order example

TS1

Divider system

Version

n_T

VD1

VD3

Height separation

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [n_T].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

Single-part end connectors – plastic (suitable for B_i 16)

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside

Single-part end connectors – plastic (suitable for B_i 25 – 50)

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

The end connectors are optionally also available without strain relief comb.

B_i [mm]	B_EF [mm]	n_z
25	37	2
38	50	4
50	62	6

Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside

Order example

End connector

End connector

Connection point

Connection type

End connector

End connector

Connection point

Connection type

Downloads

TKP35 series – Robust all-rounder with variable inner distribution

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE^® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE^®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX^® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX^®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator

Product Configurator

Efficient, quick and complete configuration the result is your individual product with an excellent price-performance ratio
Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal

Product Configurator