-
-
enFurther countries
International (EN)
to top 
Tube thread cutting machines can be used to manufacture, for example, so-called OCTG (oil country tubular goods) tubes for natural gas and crude oil production. KABELSCHLEPP® has developed, manufactured and delivered the XY telescope cover for these thread cutting machines. These machines use the principle of stationary tool and rotating tube. This allows the workpiece to be machined through 4 axes.
CROSS-COVER for 2 x 2 axes.
KABELSCHLEPP® SXM system.
Four-axle machining.
Self-supporting design.
The latest TSUBAKI KABELSCHLEPP information material:
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens outward
Opens inward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
Roller chain
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
