to top 
Channel side wall
Al alloy
Standard lengths 1000 / 2000 mm
Special lengths on request
The Alu Guide System (TKAL) for long travel applications and high loads ensures secure guidance and smooth running of the energy chain in a gliding and rolling application.
The standardized channel profiles of 1000 / 2000 mm in length can be individually adjusted to the width of the chain. They can be quickly and easily be installed with the help of a mounting kit. Such UMB mounting kits are also available for attaching the fixed-point of the energy chain.
The optional damping band additionally reduces noise emission and guarantees an even quieter running of the chain.
TSUBAKI KABELSCHLEPP also offer the Alu Guide System (TKAL) together with the appropriate energy chain as well as with the ready-to-install TOTALTRAX® System including cables.
For One-sided arrangement of the cable carrier, the cable carrier slides behind the fixed point on a slide support with run-on bevels.
Channel profile with and without supports incl. run-on bevels.
Dirt and water can drop through without restrictions.
Channel profile with and without supports incl. run-on bevels.
Dirt and water can drop through without restrictions.
For opposite arrangement, a slide support with a minimum length of 500 mm is also attached for bridging between the fixed point connections.
Channel profile with and without supports incl. run-on bevels.
Dirt and water can drop through without restrictions.
Channel profile with and without supports incl. run-on bevels.
Dirt and water can drop through without restrictions.
TKAL 134
TKAL 195
TKAL 254
TKAL 274
* for C-profiles 3938/3939
** for C-profiles 3940/3941
As a standard, the mounting kits included with the delivery are installed on all joins as well as at both ends of a channel. If you require more angle brackets beyond this, please state this when ordering.
The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
| Type | h1 [mm] | hKA [mm] | b1 [mm] | b2 [mm] | b3 [mm] | BKA [mm] | T [mm] | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| UA1455 | |||||||||||
| Glide shoes | 40 | 134 | Bk + 7 | Bk + 50 | Bk + 69 | BK + 25 | 25 | ||||
| UA1555 | |||||||||||
| Glide shoes | 53 | 134 | Bk + 9 | Bk + 52 | Bk + 67 | BK + 27 | 25 | ||||
| UA1665 | |||||||||||
| Glide shoes | 61.5 | 195 | Bk + 10 | Bk + 60.15 | Bk + 82.4 | BK + 28.6 | 45 | ||||
| UA1775 | |||||||||||
| Glide shoes | 81 | 195 | Bk + 9 | Bk + 59.15 | Bk + 83.4 | BK + 27.6 | 45 | ||||
| UA1995 | |||||||||||
| Glide shoes | 116 | 254 | Bk + 10.4 | Bk + 71.9 | Bk + 81 | BK + 45 | 45 | ||||
The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
| Type | h1 [mm] | hKA [mm] | b1 [mm] | b2 [mm] | b3 [mm] | BKA [mm] | T [mm] | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| K0650 | |||||||||||
| – | 56.5 | 134 | Bk + 5 | Bk + 48 | Bk + 71 | BK + 23 | 25 | ||||
| Slide discs | 56.5 | 134 | Bk + 13 | Bk + 56 | Bk + 63 | BK + 31 | 25 | ||||
| K0900 | |||||||||||
| – | 81 | 195 | Bk + 5 | Bk + 55.15 | Bk + 87.4 | BK + 23.6 | 25 | ||||
| Slide discs | 81 | 195 | Bk + 19 | Bk + 69.15 | Bk + 73.4 | BK + 37.6 | 45 | ||||
The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
| Type | h1 [mm] | hKA [mm] | b1 [mm] | b2 [mm] | b3 [mm] | BKA [mm] | T [mm] | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| M0650 | |||||||||||
| Glide shoes | 61.5 | 195 | Bk + 5 | Bk + 55.15 | Bk + 87.4 | BK + 23.6 | 45 | ||||
| Offroad Glide shoes | 61.5 | 195 | Bk + 5 | Bk + 55.15 | Bk + 87.4 | BK + 23.6 | 45 | ||||
| M0950 | |||||||||||
| Glide shoes | 81 | 195 | Bk + 5 | Bk + 55.15 | Bk + 87.4 | BK + 23.6 | 45 | ||||
| Offroad Glide shoes | 86 | 195 | Bk + 5 | Bk + 55.15 | Bk + 87.4 | BK + 23.6 | 45 | ||||
| M1250 | |||||||||||
| Offroad Glide shoes | 103 | 274 | Bk + 6 | Bk + 67.5 | Bk + 97.4 | BK + 40.6 | 45 | ||||
| M1300 | |||||||||||
| Glide shoes | 127.5 | 274 | Bk + 6 | Bk + 67.5 | Bk + 97.4 | BK + 40.6 | 45 | ||||
The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
| Type | h1 [mm] | hKA [mm] | b1 [mm] | b2 [mm] | b3 [mm] | BKA [mm] | T [mm] | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Q040 | |||||||||||
| – | 40 | 134 | Bk + 4 | Bk + 47 | Bk + 72 | BK + 22 | 25 | ||||
| Q060 | |||||||||||
| Glide shoes | 66.5 | 195 | Bk + 9 | Bk + 59.15 | Bk + 83.4 | BK + 27.6 | 45 | ||||
| Q080 | |||||||||||
| Glide shoes | 86 | 195 | Bk + 13 | Bk + 63.15 | Bk + 79.4 | BK + 31.6 | 45 | ||||
| Q100 | |||||||||||
| Glide shoes | 108 | 274 | Bk + 13 | Bk + 74.5 | Bk + 90.4 | BK + 47.6 | 45 | ||||
The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
| Type | h1 [mm] | hKA [mm] | b1 [mm] | b2 [mm] | b3 [mm] | BKA [mm] | T [mm] | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| TKA38 | |||||||||||
| – | 36.5 | 134 | Bk + 4 | Bk + 47 | Bk + 72 | BK + 22 | 25 | ||||
| TKA45 | |||||||||||
| – | 53 | 134 | Bk + 5 | Bk + 48 | Bk + 71 | BK + 23 | 25 | ||||
| TKA55 | |||||||||||
| – | 66.5 | 195 | Bk + 5 | Bk + 55.15 | Bk + 87.4 | BK + 23.6 | 45 | ||||
The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.
| Type | h1 [mm] | hKA [mm] | b1 [mm] | b2 [mm] | b3 [mm] | BKA [mm] | T [mm] | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| UAT1555 | |||||||||||
| – | 66.5 | 195 | Bk + 5 | Bk + 55.15 | Bk + 87.4 | BK + 23.6 | 45 | ||||
As a standard, the mounting kits included with the delivery are installed on all joins as well as at both ends of a channel. If you require more angle brackets beyond this, please state this when ordering.
The internal or external mounting kits made of stainless steel are mounted at the joints, ensuring precise connection of the joints in addition to fastening the channel to the substructure.
The internal and external mounting kits made of stainless steel are mounted with a spacing of 30-500 mm from the joints, ensuring fastening of the channel to the substructure. The mounting kit does not necessarily have to be mounted at the joints.
* More information can be found on page assembly profiles for guide channels.
The mounting brackets are mounted at the outside of the channel.
The additional joint connectors ensure precise connection of the joints.
The mounting brackets are mounted at the inside of the channel.
The additional joint connectors ensure precise connection of the joints.
UMB mounting kit
The UMB mounting kit for fixed point ensures optimum fastening of the cable carrier in the channel and depends on the cable carrier type.
Holder set strain relief (optional)
The holders are mounted on the outside of the channel for fixed installation of cables.
The twin channel connectors enable the parallel arrangement of several channels.
All pictures of the mounting kit are exemplary.
To order the Alu Guide System, please provide the following information or the used cable carrier:
Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.
to TRAXLINE®From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.
to TOTALTRAX®Reliable unrolling and optimum gliding for long travel lengths
to Support traysFor optimum placement with dynamic use of cables
to Strain relief devices
Configuration guidelines:
The latest TSUBAKI KABELSCHLEPP information material:
Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens outward
Opens inward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
Roller chain
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
