-
-
enFurther countries
International (EN)
to top 
Cover with hinge in the outer radius “standard”
Cover with hinge in the outer radius “standard”
KR [mm] | H [mm] | Hz [mm] | LB [mm] | UB [mm] |
|---|---|---|---|---|
95* | 247 | 282 | 429 | 189 |
115 | 287 | 322 | 492 | 209 |
145 | 347 | 382 | 586 | 239 |
175 | 407 | 442 | 680 | 269 |
220 | 497 | 532 | 822 | 314 |
260 | 577 | 612 | 948 | 354 |
275 | 607 | 642 | 994 | 369 |
300 | 657 | 692 | 1073 | 394 |
350 | 757 | 792 | 1230 | 444 |
* not RMD
Load diagram for unsupported length depending on the additional load.
Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application.
Intrinsic cable carrier weight qk = 3.5 kg/m. For other inner widths, the maximum additional load changes.
GO module with chain links optimized for gliding
KR [mm] | H [mm] | GO-Modul RKR [mm]
| LB [mm] | UB [mm] |
|---|---|---|---|---|
| 95* | 171 | 300 | 1180 | 560 |
| 115 | 171 | 300 | 1310 | 605 |
| 145 | 171 | 300 | 1440 | 640 |
| 175 | 171 | 300 | 1635 | 705 |
| 220 | 171 | 300 | 1950 | 810 |
| 260 | 171 | 300 | 2275 | 926 |
| 275 | 171 | 300 | 2405 | 973 |
| 350 | 171 | 300 | 2925 | 1152 |
* not RMD
The gliding cable carrier must be guided in a channel. More information
The GO module mounted on the driver is a defined sequence of 5 different KR/RKR link plates.
Glide shoes must be used for gliding applications.
Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.
to TRAXLINE®From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.
to TOTALTRAX®Reliable unrolling and optimum gliding for long travel lengths
to Support traysFor optimum placement with dynamic use of cables
to Strain relief devices
Configuration guidelines:
The latest TSUBAKI KABELSCHLEPP information material:
Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens outward
Opens inward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
Roller chain
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
