Steel Guide System (TKSG)

Guide channels in the modular system

Vlastnosti

Modular system with optimized design for long travel lengths.
Available in zinc plated sheet steel or stainless steel.
Easy installation.

Zinc plated sheet steel / stainless steel

Standard lengths 1000 / 2000 mm
Special lengths on request

Všetky piktogramy

Features

Especially suitable for cranes and applications with long travel lengths
Simple design for short installation times
No accumulation of dirt through open construction
Fast and easy installation thanks to pre-assembled sidebands and channel brackets
Complete system for screw-fitting
All components without welds

Versions

One-sided arrangement

For one-sided arrangement of the cable carrier, the cable carrier slides behind the fixed point on a continuous slide support with run-off bevels.

Open design

Channel profile with and without slide supports incl. run-on bevels.

Dirt and liquids can drop through without restrictions.

Open design

Channel profile with and without slide supports incl. run-on bevels.

Dirt and liquids can drop through without restrictions.

Opposite arrangement

For opposite arrangement, a slide support is also attached for bridging between the fixed point connections.

Open design

Channel profile with and without slide supports incl. run-on bevels.

Dirt and liquids can drop through without restrictions.

Open design

Channel profile with and without slide supports incl. run-on bevels.

Dirt and liquids can drop through without restrictions.

Dimensions

UNIFLEX Advanced

Typový rad	h₁ [mm]	h_KA [mm]	b₁ [mm]	B_KA [mm]	s [mm]	A [mm]	B [mm]	C [mm]	D [mm]	T [mm]	Y [mm]
UA1555
Klzná podložka	53	124	B_k + 9	B_K + 139	2	b₁ – 47 (FA)	-	25	6,4	24	b₁ – 69
Klzná podložka	53	124	B_k + 9	B_K + 139	2	b₁ – 21 (FU)	22,5	22,5	5,5	24	b₁ – 69

UA1665
Klzná podložka	63,5	124 (KR < 200) 176 (KR ≥ 200)	B_k + 10	B_K + 140	2	b₁ – 52 (FA)	-	30,5	8,4	24	b₁ – 69 b₁ – 66
Klzná podložka	63,5	124 (KR < 200) 176 (KR ≥ 200)	B_k + 10	B_K + 140	2	b₁ – 19 (FU)	22,5	25	5,5	25	b₁ – 69 b₁ – 66

UA1775
Klzná podložka	83,5	176 (KR < 200) 209 (KR ≥ 200)	B_k + 10	B_K + 140	2	b₁ – 52 (FA)	20	30	8,5	25	b₁ – 66 b₁ – 70
Klzná podložka	83,5	176 (KR < 200) 209 (KR ≥ 200)	B_k + 10	B_K + 140	2	b₁ – 19 (FU)	20	30	8,5	25	b₁ – 66 b₁ – 70

UA1995
Klzná podložka	116,5	258	B_k + 11	B_K + 141	2	b₁ – 28 (FU)	35	30	8,5	50	b₁ – 100

M series

Typový rad	h₁ [mm]	h_KA [mm]	b₁ [mm]	B_KA [mm]	s [mm]	A [mm]	B [mm]	C [mm]	D [mm]	T [mm]	Y [mm]
M0650
Klzná podložka	60,5	124 (KR < 200) 176 (KR ≥ 200)	B_k + 5	B_K + 135	2	b₁ – 55 (FAI)	30	25	6,4	24 25	b₁ – 69 b₁ – 66
Offroad klzná podložka	63,5	124 (KR < 200) 176 (KR ≥ 200)	B_k + 5	B_K + 135	2	b₁ – 24 (FU)	22,5	30,5	6,5	24 25	b₁ – 69 b₁ – 66

M0950
Klzná podložka	83,5	176 (KR < 200) 209 (KR ≥ 200)	B_k + 5	B_K + 135	2	b₁ – 70 (FAI)	40	30	8,4	25	b₁ – 66 b₁ – 70
Offroad klzná podložka	86,5	176 (KR < 200) 209 (KR ≥ 200)	B_k + 5	B_K + 135	2	b₁ – 19,5 (FU)	35	34,5	8,5	25	b₁ – 66 b₁ – 70

M1250
Klzná podložka	99,5	209 (KR < 300) 258 (KR ≥ 300)	B_k + 6	B_K + 136	2	b₁ – 83 (FAI)	50	35	10,5	50	b₁ – 70 b₁ – 90
Offroad klzná podložka	103	209 (KR < 300) 258 (KR ≥ 300)	B_k + 6	B_K + 136	2	b₁ – 23 (FU)	35	40,5	11	50	b₁ – 70 b₁ – 90

M1300
Klzná podložka	127,5	258	B_k + 6	B_K + 136	2	b₁ – 27 (FU)	35	30	11	50	b₁ – 90

S/SX series

Typový rad	h₁ [mm]	h_KA [mm]	b₁ [mm]	B_KA [mm]	s [mm]	A [mm]	B [mm]	C [mm]	D [mm]	T [mm]	Y [mm]
S/SX0650
Klzná podložka	56	124	B_k + 10	B_K + 140	2	b₁ – 47 (FAI)	45	25	6,4	24	b₁ – 69

S/SX0950
Klzná podložka	73	176	B_k + 10	B_K + 140	2	b₁ – 77 (FAI)	65	30	8,4	27	b₁ – 66

S/SX1250
Offroad klzná podložka	103	209 (KR < 350) 258 (KR ≥ 350)	B_k + 12	B_K + 142	2	b₁ – 76 (FAI)	80	35	10,5	50	b₁ – 100

S/SX1252
Offroad klzná podložka	103	209 (KR < 350) 258 (KR ≥ 350)	B_k + 12	B_K + 142	2	b₁ – 76 (FAI)	80	35	10,5	50	b₁ – 100

The dimension A refers only to the connection holes.

The cable carrier outer width without attachments B_k is taken into account for calculating the inner width of guide channel b₁ and the overall width B_KA.

Fixing Elements

Fixing with channel brackets

The channel brackets are mounted at the joins, ensuring precise connection of the joins in addition to fixing the channel to the substructure.

Optimum alignment of the joins
Reduced installation times
No welds
Minimum number of screw connections
Reliable fixing under rough conditions
High stability

Steel Guide System Fixing with channel brackets Front

Steel Guide System Fixing with channel brackets Side

Steel Guide System Fixing with channel brackets Above

s [in mm]	D₁ [in mm]	h_KA [in mm]
2	11	124
2	11	176
2	11	209
2	11	258

The sheet metal thickness “s” corresponds to the respective wall thickness “s” of the channel.

As a standard, the channel brackets included with the delivery are installed on all joins as well as at both ends of a channel. If you require more channel brackets beyond this, please state this when ordering.

Suitable perforated C- profiles can be found from here.

Fixing material (optional)

The delivery scope of the Steel Guide System does not include the optional joining clamp fixing kit.

Fixing material

C-rail (length depends on b₁)
T-head bolt M10
Hex nut
Washer

Order

To order the Steel Guide System (TKSG), please provide the following information:

Number of guide channels
Total length of channel
Support length L_KA'
Ouer height of guide channel h_KA
Inner width of guide channel b₁
Material
Support height h₁
Delivery (unmounted/mounted)
Fixing with or without C-profile

Downloads

Support trays and guide channels – Reliable unrolling and optimum gliding for long travel lengths

K tomu patrí

Vodiče pre nosiče energie – TRAXLINE®

Spoľahlivý, robustný s vysokou dostupnosťou. Profitujte z dlhoročných skúseností a z priebežnej optimalizácie overenou počas testov i v praxi. TRAXLINE^® vodiče pre kompetentné systémové poradenstvo ako aj servis po celom svete.

na TRAXLINE^®

Systémy nosičov energií pripravené na zapojenie – TOTALTRAX®

Od samostatných vedení až po komplexné systémy pripravené na zapojenie, v počte 1 až po série - po celom svete sú v nasadení tisícky osvedčených systémov. Prednosti TOTALTRAX^® systémov sú zjavné: jedna kontaktná osoba, jedno objednávacie číslo, dodávka just in time na želané miesto, krátke prestoje vďaka Plug & Play montáži.

na TOTALTRAX^®

Príslušenstvo

Spoľahlivé odvíjanie a optimálne kĺzanie pri dlhých pojazdoch

na Podporné kanály
na Vodiace kanály

Na optimálne umiestnenie pri dynamickom použití káblov

k Odľahčenie v ťahu

Služby

Konfigurátor produktu

Konfigurátor produktu

Konfigurovať efektívne, rýchlo a kompletne – výsledkom bude Váš systém nosičov energie s optimálnym pomerom cena / výkon
Online Konfigurátor produktuEngineer + zodpovedajúce CAD modely CADbez zmeny platformy

Konfigurátor produktu

CADenas

CADenas

Skráťte Vaše konštrukčné časy
Urýchlite Váš proces návrhu
Originálne dáta priamo od výrobcu
3D komponentné modely v rôznych formátoch CAD

CADenas

Glossar

Glossar

nosiče energií – prehľad všetkých skratiek a piktogramov

Glossar

Technické informácie

Technické informácie

Konštrukčné smernice:

Výber vhodného nosiča energie
Inštalačné pokyny pre káble a hadice
Instalačné varianty

Technické informácie

Literatúra

Literatúra

Aktuálny informačný leták TSUBAKI KABELSCHLEPP :

Download ako PDF-súbor

Požiadať o katalógy a brožúry v tlačenej podobe

Product filter

Product filter

Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Product filter

Konfigurátor produktu

CADenas

Glossar

Technické informácie

Literatúra

Product filter