Stay arrangement on each chain link (VS: fully-stayed)
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
t
[mm]
|
hi
[mm]
|
hG
[mm]
|
hG'
[mm]
|
Bi
[mm]
|
BSt
[mm]
* |
Bk
[mm]
|
BEF
[mm]
|
qk
[kg/m]
|
---|---|---|---|---|---|---|---|---|
95 | 44 | 68 | 73 | 88 – 563 | 106 – 581 | BSt + 19 | BSt + 28 | 9,97 – 21,95 |
KR
[mm]
| |||||||
---|---|---|---|---|---|---|---|
170 | 200 | 260 | 290 | 320 | 350 | 410 | 600 |
S0950
107
RMD
200
St
2375
HS
As a standard, the divider system is mounted on every 2nd cover/chain link (HS).
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).
Verzia |
aT min
[mm]
|
ax min
[mm]
|
ac min
[mm]
|
nT min |
---|---|---|---|---|
A | 12 | 14 | 10 | – |
The dividers can be moved in the cross section.
Verzia |
aT min
[mm]
|
ax min
[mm]
|
ac min
[mm]
|
nT min |
---|---|---|---|---|
A | 12 | 14 | 10 | 2 |
The dividers can be moved in the cross section.
TS1
A
3
VD0
VD1
Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].
If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.
The end dividers are part of the divider system and don‘t have to be ordered separately.
End connectors made of steel. The connection variants on the fixed point and on the driver can be combined and changed later on, if necessary.
Caution: The standard connection variant FAI/MAI is only possible from Bk of 122 mm.
F – fixed point
M – driver
A – threaded joint to outside (standard)
I – threaded joint to inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside
I – connection surface inside
A – connection surface outside
Steel
F
A
I
Steel
M
A
I
Steel
Steel
F
M
A
A
I
I
We recommend the use of strain reliefs at the driver and fixed point.
Spoľahlivý, robustný s vysokou dostupnosťou. Profitujte z dlhoročných skúseností a z priebežnej optimalizácie overenou počas testov i v praxi. TRAXLINE® vodiče pre kompetentné systémové poradenstvo ako aj servis po celom svete.
na TRAXLINE®Od samostatných vedení až po komplexné systémy pripravené na zapojenie, v počte 1 až po série - po celom svete sú v nasadení tisícky osvedčených systémov. Prednosti TOTALTRAX® systémov sú zjavné: jedna kontaktná osoba, jedno objednávacie číslo, dodávka just in time na želané miesto, krátke prestoje vďaka Plug & Play montáži.
na TOTALTRAX®Spoľahlivé odvíjanie a optimálne kĺzanie pri dlhých pojazdoch
na Podporné kanályNa optimálne umiestnenie pri dynamickom použití káblov
k Odľahčenie v ťahuKonštrukčné smernice:
Aktuálny informačný leták TSUBAKI KABELSCHLEPP :