TKR0280.030

Stay variant 030 – with externally opening and detachable crossbars

Vlastnosti

Low-vibration plastic frame with particularly long service life thanks to molded chain links.
Swivable and detachable on one side in any position.
Outside: Swivable and detachable
Inside: detachable

Stay arrangement on each chain link (VS: fully-stayed)

B_i von 50 – 200 mm

Všetky piktogramy

Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length

Cable carrier length L_K: L_K≈ L_S/2 + L_B

Cable carrier length L_k rounded to pitch t for odd number of chain links

t [mm]	h_i [mm]	h_G [mm]	B_k [mm]	q_k [kg/m]
28	52	66	B_i + 30	2,00 – 3,20

B_i [mm]
50	62	75	87	100	125	150	200

KR [mm]
75	100	150	200

Príklad objednania

TKR0280

Typový rad

100

B_i [mm]

030

Konštrukcia mostíka

150

KR [mm]

840

L_k [mm]

Usporiadanie mostíka

Vnútorné rozdelenie

Systémy oddeľovacích mriežok

The divider system is mounted on every 2^nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

Fixable dividers are available for applications with lateral accelerations and for applications lying on the side.
The arresting cams click into place in the locking grids in the crossbars (version B).

Divider system TS0

without height separation

Verzia	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x Mriežka} [mm]	n_{T min}
A	3	8	5,6	–	–
B	A	8	5,6	4	–

B_i [mm]

a_{T min} [mm]

5,5

3,5

100

125

6,5

150

200

Divider system TS1

with continuous height separation

Verzia	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x Mriežka} [mm]	n_{T min}
A	3	8	5,6	–	2
B	A	8	5,6	4	2

B_i [mm]

a_{T min} [mm]

5,5

3,5

100

125

6,5

150

200

Divider system TS3

with height separation made of aluminum partitions

Verzia	a_{T min} [mm]	a_{x min} [mm]	a_{c min} [mm]	a_{x Mriežka} [mm]	n_{T min}
A	3	26	20	–	2
B	A	28	22	4	2

B_i [mm]

a_{T min} [mm]

5,5

3,5

100

125

6,5

150

200

The dividers are fixed by the partitions, the complete divider system is movable in the cross section.

Aluminum section subdivisions are only available with a_x > 26 mm.

Príklad objednania

TS0

Systém mriežok

Verzia

n_T

VD0

VD1

výškové rozdelenie

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [n_T ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [a_T/a_x] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

Pripojovacie prvky

UMB end connectors UMB – plastic

The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom or face on.

Recommended tightening torque:
0,6 Nm for screws M4

B_i [mm]	B_EF [mm]	n_z
50	80	2 x 3
62	92	-
75	105	2 x 5
87	117	-
100	130	2 x 7
125	155	2 x 9
150	180	2 x 11
200	230	-

TKR0280 UMB end connectors UMB – plastic

Bod pripojenia

F – fixed point
M – driver

Spôsob pripojenia

U – universal mounting bracket

Príklad objednania

UMB

pripojeniesprvok

pripojeniebod

Spôsob pripojenia

pripojeniesprvok

UMB

pripojeniebod

Spôsob pripojenia

We recommend the use of strain reliefs at the driver and fixed point.

Downloads

TKR series – Extremely quiet and low-vibration for highly dynamic applications

K tomu patrí

Vodiče pre nosiče energie – TRAXLINE®

Spoľahlivý, robustný s vysokou dostupnosťou. Profitujte z dlhoročných skúseností a z priebežnej optimalizácie overenou počas testov i v praxi. TRAXLINE^® vodiče pre kompetentné systémové poradenstvo ako aj servis po celom svete.

na TRAXLINE^®

Systémy nosičov energií pripravené na zapojenie – TOTALTRAX®

Od samostatných vedení až po komplexné systémy pripravené na zapojenie, v počte 1 až po série - po celom svete sú v nasadení tisícky osvedčených systémov. Prednosti TOTALTRAX^® systémov sú zjavné: jedna kontaktná osoba, jedno objednávacie číslo, dodávka just in time na želané miesto, krátke prestoje vďaka Plug & Play montáži.

na TOTALTRAX^®

Príslušenstvo

Spoľahlivé odvíjanie a optimálne kĺzanie pri dlhých pojazdoch

na Podporné kanály
na Vodiace kanály

Na optimálne umiestnenie pri dynamickom použití káblov

k Odľahčenie v ťahu

Služby

Konfigurátor produktu

Konfigurátor produktu

Konfigurovať efektívne, rýchlo a kompletne – výsledkom bude Váš systém nosičov energie s optimálnym pomerom cena / výkon
Online Konfigurátor produktuEngineer + zodpovedajúce CAD modely CADbez zmeny platformy

Konfigurátor produktu