Easy Guide System (TKEG)

Guide channels for multifunctional use

Vlastnosti

Flexible use in many areas of application.
Made of zinc plated sheet steel or stainless steel.
Easy and fast horizontal or vertical arrangement.
On its side laying installation possible.

Zinc plated sheet steel / stainless steel

Standard lengths 2000 mm
Special lengths on request

Všetky piktogramy

Features

Space-saving design
Installation possible horizontal or laying on its side
Easy and fast assembly by only one fitter
Saves additional cable channels through installation of permanent cables directly on the holder (securely behind the channel)
System remains horizontally adjustable after installation
Mounting holes for the cable carriers and cable ducts every 850 mm
Brackets are installed with screws or weld studs
No complex steel structure necessary
Suitable for all I-beams and box beams
The same mounting brackets for different trough sizes/chain typesCan be installed “flying”
Closed design
- Guiding for suspended chains
- Allows operation of the cable carrier laying on its side
- Mechanical protection
- Protection against lateral acceleration
- Protection against the cable carrier "banging" during acceleration and deceleration

Our engineers will be happy to help with your project planning – please contact us.

Easy Guide System - Magnets as mounting aids

With magnets as mounting aids for easy positioning of the holder and placing of the fastenings such as drilled holes or welded studs.

Versions

One sided arrangement with central feed

For single-sided arrangement of the cable carrier with central feed, the cable carrier slides behind the fixed point on a continuous slide plate.

Closed design – standing without enclosure
(Variante A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Closed design – standing without enclosure
(Variante A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

For central feed, permanent cables can be placed directly on the holder (securely behind the channel)

One-sided arrangement with end feed

For single-sided arrangement of the cable carrier with end feed, the cable carrier slides behind the fixed point on itself.

Closed design – standing without enclosure
(Variant A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Closed design – standing without enclosure
(Variant A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Opposite arrangement

For opposite arrangement, a slide support is also attached for bridging between the fixed point connections.

Closed design – standing without enclosure
(Variant A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Closed design – laying on its side with enclosure
(Variant C)

One-part channel laying on its side in enclosed version (enclosure) incl. driver sledge.

Closed design – standing without enclosure
(Variant A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Closed design – laying on its side with enclosure
(Variant C)

One-part channel laying on its side in enclosed version (enclosure) incl. driver sledge.

Dimensions

Dimensions | standing without enclosure (Variant A)

Guide channel
Stable gliding support made of zinc plated sheet steel or stainless steel
Holder

Easy Guide System Dimensions without enclosure variant A Above (1)

Slide support height

Slide support height h₁ = h_G

QuickTrax® series

The cable carrier outer width without attachments B_k is taken into account for calculating the inner width of guide channel b₁ and the overall width B_KA.

B_i [mm]	KR [mm]	h₁ [mm]	h_KA [mm]	Celková výška kanála [mm]	b₁ [mm]	B_KA [mm]	A [mm]	B [mm]	C [mm]	C₁ [mm]	E [mm]	F [mm]	G [mm]	Y [mm]
QT0320 with channel holder 202
25	75	25,5	54	202	42	90,7	10	79	140	14	129	40	39	27
50	100	25,5	54	202	67	115,7	35	79	140	14	129	40	39	52

QT0320 with channel holder 155
25	75	25,5	54	156,5	42	90,7	10	79	140	14	129	40	39	27
50	100	25,5	54	156,5	67	115,7	35	79	140	14	129	40	39	52

EasyTrax® series

The cable carrier outer width without attachments B_k is taken into account for calculating the inner width of guide channel b₁ and the overall width B_KA.

B_i [mm]	KR [mm]	h₁ [mm]	h_KA [mm]	Celková výška kanála [mm]	b₁ [mm]	B_KA [mm]	A [mm]	B [mm]	C [mm]	C₁ [mm]	E [mm]	F [mm]	G [mm]	Y [mm]
ET0320 with channel holder 202
25	75	25,5	54	202	42	90,7	10	79	140	14	129	40	39	27
50	100	25,5	54	202	67	115,7	35	79	140	14	129	40	39	52

ET0320 with channel holder 155
25	75	25,5	54	156,5	42	90,7	10	79	140	14	129	40	39	27
50	100	25,5	54	156,5	67	115,7	35	79	140	14	129	40	39	52

Dimensions

Dimensions | standing without enclosure (Variant A)

Guide channel
Stable gliding support made of zinc plated sheet steel or stainless steel
Holder

Easy Guide System Dimensions without enclosure variant A Above (2)

Slide support height

Slide support height h₁ = h_G

UNIFLEX Advanced series

The cable carrier outer width without attachments B_k is taken into account for calculating the inner width of guide channel b₁ and the overall width B_KA.

B_i [mm]	KR [mm]	h₁ [mm]	h_KA [mm]	Celková výška kanála [mm]	b₁ [mm]	B_KA [mm]	A [mm]	B [mm]	C [mm]	E [mm]	F [mm]	G [mm]	Y [mm]
UA1455 with channel holder 202
58	125	36	100	202	79	127,7	43,5	73	152	123	52	39	64
78	125	36	100	202	99	147,7	63,5	73	152	123	52	39	84
103	125	36	100	202	124	172,7	88,5	73	152	123	52	39	109

UA1455 with channel holder 155
58	125	36	100	156,5	79	127,7	43,5	73	152	123	52	39	64
78	125	36	100	156,5	99	147,7	63,5	73	152	123	52	39	84
103	125	36	100	156,5	124	172,7	88,5	73	152	123	52	39	109

UA1555 with channel holder 202
50	125	50	115	202	73	121,7	30	61	176	111	76	39	58
75	125	50	115	202	98	146,7	55	61	176	111	76	39	83
100	125	50	115	202	123	171,5	80	61	176	111	76	39	108

UA1555 with channel holder 155
50	125	50	115	156,5	73	121,7	30	61	176	111	76	39	58
75	125	50	115	156,5	98	146,7	55	61	176	111	76	39	83
100	125	50	115	156,5	123	171,7	80	61	176	111	76	39	108

Standard version of the cable carrier in the Easy Guide System without glide shoes.

Dimensions

Dimensions | standing with enclosure (Variant B)

Guide channel
Stable gliding support made of zinc plated sheet steel or stainless steel
Holder
Enclosure

Easy Guide System Dimensions with enclosure variant B Above (1)

Slide support height

Slide support height h₁ = h_G

QuickTrax® series

The cable carrier outer width without attachments B_k is taken into account for calculating the inner width of guide channel b₁ and the overall width B_KA.

B_i [mm]	KR [mm]	h₁ [mm]	h_KA [mm]	Celková výška kanála [mm]	b₁ [mm]	B_KA [mm]	A [mm]	B [mm]	C [mm]	C₁ [mm]	E [mm]	F [mm]	G [mm]	I [mm]	Y [mm]
QT0320 with channel holder 202
25	100	25,5	236,5	269,5	42	90,7	10	79	140	14	129	40	152	54	27
50	100	25,5	236,5	269,5	67	115,7	35	79	140	14	129	40	152	54	52

QT0320 with channel holder 155
25	100	25,5	236,5	269,5	42	90,7	10	79	140	14	129	40	152	54	27
50	100	25,5	236,5	269,5	67	115,7	35	79	140	14	129	40	152	54	52

EasyTrax® series

The cable carrier outer width without attachments B_k is taken into account for calculating the inner width of guide channel b₁ and the overall width B_KA.

B_i [mm]	KR [mm]	h₁ [mm]	h_KA [mm]	Celková výška kanála [mm]	b₁ [mm]	B_KA [mm]	A [mm]	B [mm]	C [mm]	C₁ [mm]	E [mm]	F [mm]	G [mm]	I [mm]	Y [mm]
ET0320 with channel holder 202
25	100	25,5	236,5	269,5	42	90,7	10	79	140	14	129	40	152	54	27
50	100	25,5	236,5	269,5	67	115,7	35	79	140	14	129	40	152	54	52

ET0320 with channel holder 155
25	100	25,5	236,5	269,5	42	90,7	10	79	140	14	129	40	152	54	27
50	100	25,5	236,5	269,5	67	115,7	35	79	140	14	129	40	152	54	52

Our engineers will be happy to help with your project planning – please contact us.

Dimensions | standing with enclosure (Variant B)

Easy Guide System Dimensions with enclosure variant B Front (2)

Guide channel
Stable gliding support made of zinc plated sheet steel or stainless steel
Holder
Enclosure

Easy Guide System Dimensions with enclosure variant B Above (2)

Slide support height

Slide support height h₁ = h_G

UNIFLEX Advanced series

The cable carrier outer width without attachments B_k is taken into account for calculating the inner width of guide channel b₁ and the overall width B_KA.

B_i [mm]	KR [mm]	h₁ [mm]	h_KA [mm]	Celková výška kanála [mm]	b₁ [mm]	B_KA [mm]	A [mm]	B [mm]	C [mm]	E [mm]	F [mm]	G [mm]	I [mm]	Y [mm]
UA1455 with channel holder 202
58	125	36	297	330	79	127,7	43,5	73	152	123	52	212,5	100	64
78	125	36	297	330	99	147,7	63,5	73	152	123	52	212,5	100	84
103	125	36	297	330	124	172,7	88,5	73	152	123	52	212,5	100	109

UA1455 with channel holder 155
58	125	36	297	330	79	127,7	43,5	73	152	123	52	212,5	100	64
78	125	36	297	330	99	147,7	63,5	73	152	123	52	212,5	100	84
103	125	36	297	330	124	172,7	88,5	73	152	123	52	212,5	100	109

UA1555 with channel holder 202
50	125	50	311	344	73	121,7	30	61	176	121	76	226,5	115	58
75	125	50	311	344	98	146,7	55	61	176	121	76	226,5	115	83
100	125	50	311	344	123	171,7	80	61	176	121	76	226,5	115	108

UA1555 with channel holder 155
50	125	50	311	344	73	121,7	30	61	176	121	76	226,5	115	58
75	125	50	311	344	98	146,7	55	61	176	121	76	226,5	115	83
100	125	50	311	344	123	171,7	80	61	176	121	76	226,5	115	108

Dimensions

Dimensions | laying on its side (Variant C)

Easy Guide System Dimensions laying Above

QuickTrax® series | UNIFLEX Advanced series

B_i [mm]	KR [mm]	h_KA [mm]	Celková výška kanála [mm]	b₁ [mm]	B_KA [mm]	A [mm]	B [mm]	C [mm]	C₁ [mm]	G [mm]	I [mm]
QT0320 \| UA1320 with channel holder 202
15	48	132,5	202	32	80,7	–	85	128	14	37,5	54
25	48	132,5	202	42	90,7	10	85	128	14	37,5	54
50	48	132,5	202	67	115,7	35,5	85	128	14	37,5	54

QT0320 \| UA1320 with channel holder 155
15	48	132,5	165,5	32	80,7	–	85	128	14	84,5	54
25	48	132,5	165,5	42	90,7	10	85	128	14	84,5	54
50	48	132,5	165,5	67	115,7	35,5	85	128	14	84,5	54

Fixing Elements

For variant C (laying on its side), the holders have to be mounted on the joins. For variant A and B, the holders can be installed in any position.

Mounting with holder 155

Easy Guide System Mounting with 155 Front

Easy Guide System Mounting with 155 Side

Easy Guide System Mounting with 155 Perspective

Mounting with holder 202

Easy Guide System Mounting with 202 Front

Easy Guide System Mounting with 202 Side

Easy Guide System Mounting with 202 Perspective

Mounting kit

Set for fixing the holders on the channel.

Installation kit

Holder
Holder clamp
Join connector
Nut
Screw M4 x 12
Screw
Washer
Washer

Príklad objednania

Channel

TKEG

typ kanála

variant

vydanie

100

h_KA [mm]

b₁ [mm]

počet

Caution: Not all combinations are possible.
Please note the information on the individual channel variants.

Holder

TKEG

typ kanála

H202

variant

počet

K tomu patrí

Vodiče pre nosiče energie – TRAXLINE®

Spoľahlivý, robustný s vysokou dostupnosťou. Profitujte z dlhoročných skúseností a z priebežnej optimalizácie overenou počas testov i v praxi. TRAXLINE^® vodiče pre kompetentné systémové poradenstvo ako aj servis po celom svete.

na TRAXLINE^®

Systémy nosičov energií pripravené na zapojenie – TOTALTRAX®

Od samostatných vedení až po komplexné systémy pripravené na zapojenie, v počte 1 až po série - po celom svete sú v nasadení tisícky osvedčených systémov. Prednosti TOTALTRAX^® systémov sú zjavné: jedna kontaktná osoba, jedno objednávacie číslo, dodávka just in time na želané miesto, krátke prestoje vďaka Plug & Play montáži.

na TOTALTRAX^®

Príslušenstvo

Spoľahlivé odvíjanie a optimálne kĺzanie pri dlhých pojazdoch

na Podporné kanály
na Vodiace kanály

Na optimálne umiestnenie pri dynamickom použití káblov

k Odľahčenie v ťahu

Služby

Konfigurátor produktu

Konfigurátor produktu

Konfigurovať efektívne, rýchlo a kompletne – výsledkom bude Váš systém nosičov energie s optimálnym pomerom cena / výkon
Online Konfigurátor produktuEngineer + zodpovedajúce CAD modely CADbez zmeny platformy

Konfigurátor produktu

CADenas

CADenas

Skráťte Vaše konštrukčné časy
Urýchlite Váš proces návrhu
Originálne dáta priamo od výrobcu
3D komponentné modely v rôznych formátoch CAD

CADenas

Glossar

Glossar

nosiče energií – prehľad všetkých skratiek a piktogramov

Glossar

Technické informácie

Technické informácie

Konštrukčné smernice:

Výber vhodného nosiča energie
Inštalačné pokyny pre káble a hadice
Instalačné varianty

Technické informácie

Literatúra

Literatúra

Aktuálny informačný leták TSUBAKI KABELSCHLEPP :

Download ako PDF-súbor

Požiadať o katalógy a brožúry v tlačenej podobe

Product filter

Product filter

Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Product filter

Konfigurátor produktu

CADenas

Glossar

Technické informácie

Literatúra

Product filter