to top Arrow Up

LS/LSX series

Cost-effective steel chains with light design

  1. All stays available in 1 mm width sections
  2. 4-fold bolted aluminum stays for extreme loads
  3. Rolling stays
  4. Aluminum hole stays
  5. Mounting frame stays
  6. Stops integrated into link plate – no additional bolts required 
  7. Different separation options for the cables
  8. Plastic or steel dividers
  9. Weight-optimized side bands made of hardened steel or stainless steel
  10. Optional center bolt for applications with high loads
  11. Good ratio of inner to outer width – no end divider required
  12. End connectors for different connection variants


  • Weight-optimized one-part link plate design
  • Better value than comparable steel cable carriers
  • Significantly higher unsupported lengths compared to plastic cable carriers of a similar size
  • Integrated radius and pre-tension stops – in a good value design
  • Bolted stay systems, solid end connectors
  • Cover with steel band available on request
  • Also possible as a double band solution
  • Good corrosion resistance

The design
The weight-optimized link plate design makes the cable carriers very light yet highly sturdy. For the LS series, the unsupported length is significantly higher compared to plastic cable carriers of a similar size.

Inner width (B<sub>i</sub>) in 1 mm increments
Opens inward/outward
Covered cable carrier
Sliding dividers
Height separation possible
Resistant to hot chips
Low weight
LS/LSX series Features 1

Weight-optimized link plates consist of only one plate – the stop system is integrated

LS/LSX series Features 2

Lightweight side bands without additional bolts – hardened steel or stainless steel

LS/LSX series Features 3

Optional: Center bolts and circlip for applications with high loads

LS/LSX series Features 4

Optional: C-rail for strain relief elements attached in the connection

Sturdy and durable, even under extreme conditions

Double-band steel cable carrier LS1050
  • Up to 40% longer unsupported lengths compared to LS1050 with standard side band with the same additional load, as part of the load diagram
  • Very high additional loads: up to 40 kg/m possible
  • Long service life even with high dynamic loads
  • High travel speeds
LS/LSX series Stable

Longer service life through hardened side bands

The hardened surface significantly increases the service life of the LS1050. Tests were carried out on cable carriers with identical designs.
The LS1050 is therefore ideal for applications with many travel cycles, for example in 3-shift operation.

LS/LSX series Compare Lifetime

Significantly higher unsupported lengths compared to plastic cable carriers of a similar size

LS/LSX series Load diagram

Weight-optimized through adapted link plate design

LS/LSX series Compare weight optimization


LS/LSX series LS/LSX1050


Inner heights [hi]:
48 – 58 mm
Chain widths [Bk]:
100 – 600 mm
Pitch [t]:
105 mm
Bending [KR]:
105 – 430 mm
more details
LS/LSX1050 48 – 58 100 – 600 105 105 – 430


Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.


Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.



Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices


Product Configurator
Product Configurator

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal


  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats


Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants


The latest TSUBAKI KABELSCHLEPP information material:

Product filter
Product filter

Product filter

Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Subject to change.
Please contact us:
Your contact: