The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.
|25||36||38.5||78||Bi + 16||Bi + 19||0.8|
The divider system is mounted on every 2nd chain link as a standard.
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).
For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation.
The arresting cams click into place in the locking grids in the crossbar (version B).
The dividers can be moved in the cross section.
Please state the designation of the divider system (TS0), the version, and the number of dividers per cross section [nT]. You can add a sketch to your order.
Recommended tightening torque:
6 Nm for screws M6 - 8.8
|94||2 x 6|
The end connectors are optionally also available without strain relief comb. Please state when ordering.
F – fixed point
M – driver
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside
Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.to TRAXLINE®
From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.to TOTALTRAX®
Cable Carriers – Overview of general abbreviations and pictographsGlossary
The latest TSUBAKI KABELSCHLEPP information material: