UA1665.RMA

Stay variant RMA – Mounting frame stay

Properties

Weight-optimized plastic frame with particularly high torsional rigidity.
Plastic crossbars and aluminum profile bars with plastic mounting frame stays for guiding very large cable diameters.
Outside/inside: threaded joint easy to release.

Stay arrangement on each chain link (VS: fully-stayed)

B_i 125 – 200 mm

All pictographs

Dimensions

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length

Cable carrier length L_K: L_K≈ L_S/2 + L_B

Cable carrier length L_k rounded to pitch t

t [mm]	h_i [mm]	h_G [mm]	B_k [mm]	B_EF [mm]	q_k (RVAI)^* [kg/m]	q_k (RVAO)^* [kg/m]
66.5	44	60	B_i + 22	B_i + 27	3.10 – 3.95	3.58 – 4.66

B_i [mm]
125	150	175	200

H_i [mm]
114	139	164	189

KR [mm]
75	100	120	140	200	250	300

* indicated according to standard pitch

Order example

UA1665

Type

030

Stay variant

150

B_i [mm]

140

KR [mm]

2660

L_k [mm]

RVAO

Stay arrangement

Our technical support can provide help for gliding arrangements: technik@kabelschlepp.de

Assembly variants

RMAI – assembly to the inside:
standard pitch, mounting frame stay on every 4th stay, no screw fixing. Gliding application is not possible when using assembly version RVAI.
Observe minimum KR:
H_i = 114 mm: KR_min   = 200 mm
H_i = 139 mm: KR_min   = 250 mm
H_i = 164 mm: KR_min   = 300 mm
H_i = 189 mm: KR_min   = 300 mm

RMAO – assembly to the outside:
standard pitch, mounting frame stay on every 2^nd stay, screw fixing.
cable carrier rests on the bars. A bracket must be provided for the fixed point.
Guiding in a channel is required for support. Please contact our technical support at technik@kabelschlepp.de to find the corresponding guide channel.
Please note the operating and installation height.

Cross section mounting frame stay

To achieve a nearly square cross section in the mounting frame stay, we recommend the following combination of B_iand H_i:

B_i [mm]	H_i [mm]	KR_min [mm]	Stays [mm]
125	114	200	100
150	139	250	125
175	164	300	150
200	189	300	175

End connectors

Universal end connectors UMB – plastic (standard)

The universal mounting brackets (UMB) are made from plastic and can be mounted from above, from below or on the face side.

Recommended tightening torque:
5 Nm for screws M5 - 8.8

B_i [mm]	n_z
50	2 x 3
75	2 x 5
100	2 x 7
125	2 x 9
150	2 x 11
175	2 x 13

The end connectors are optionally also available with strain relief comb or with C-rail Art. no. 3931 (1 on each side) for clamps. Please state when ordering.

Connection point

F – fixed point
M – driver

Connection type

U – universal mounting bracket

Order example

UMB

End connector

Connection point

Connection type

End connector

UMB

Connection point

Connection type

We recommend the use of strain reliefs at the driver and fixed point.

Single-part end connectors – plastic

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

Recommended tightening torque: 15 Nm for screws M8 - 8.8

B_i [mm]	n_z
50	2 x 4
75	2 x 6
100	2 x 8
125	2 x 10
150	2 x 12
175	2 x 14
200	2 x 16
225	2 x 18
250	2 x 20

The end connectors are optionally also available without strain relief comb. Please state when ordering.

Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Order example

End connector

End connector

Connection point

Connection type

End connector

End connector

Connection point

Connection type

Downloads

UNIFLEX Advanced series – Light, quiet all-rounder with a wide range of applications

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE^® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE^®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX^® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX^®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator

Product Configurator

Efficient, quick and complete configuration the result is your individual product with an excellent price-performance ratio
Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal

Product Configurator