to top Arrow Up

Easy Guide System (TKEG)

Guide channels for multifunctional use

guide-channel_easy-guide-system_start_03.png

Properties

  • Flexible use in many areas of application. 
  • Made of zinc plated sheet steel or stainless steel.
  • Easy and fast horizontal or vertical arrangement.
  • On its side laying installation possible.
test
Stay arrangement on every 2<sup>nd</sup> chain link

Zinc plated sheet steel / stainless steel

Stay arrangement on every chain link

Standard lengths 2000 mm
Special lengths on request

Features
  • Space-saving design
  • Installation possible horizontal or laying on its side
  • Easy and fast assembly by only one fitter
  • Saves additional cable channels through installation of permanent cables directly on the holder (securely behind the channel)
  • System remains horizontally adjustable after installation
  • Mounting holes for the cable carriers and cable ducts every 850 mm
  • Brackets are installed with screws or weld studs
  • No complex steel structure necessary
  • Suitable for all I-beams and box beams
  • The same mounting brackets for different trough sizes/chain typesCan be installed “flying”
  • Closed design
    • Guiding for suspended chains
    • Allows operation of the cable carrier laying on its side
    • Mechanical protection
    • Protection against lateral acceleration
    • Protection against the cable carrier "banging" during acceleration and deceleration
Guide channel required

Our engineers will be happy to help with your project planning – please contact us.

Easy Guide System - Magnets as mounting aids

With magnets as mounting aids for easy positioning of the holder and placing of the fastenings such as drilled holes or welded studs.

Versions

One sided arrangement with central feed

For single-sided arrangement of the cable carrier with central feed, the cable carrier slides behind the fixed point on a continuous slide plate.

Closed design – standing without enclosure
(Variante A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Closed design – standing without enclosure
(Variante A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Important information

For central feed, permanent cables can be placed directly on the holder (securely behind the channel)

One-sided arrangement with end feed

For single-sided arrangement of the cable carrier with end feed, the cable carrier slides behind the fixed point on itself.

Closed design – standing without enclosure
(Variant A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Closed design – standing without enclosure
(Variant A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Opposite arrangement

For opposite arrangement, a slide support is also attached for bridging between the fixed point connections.

Closed design – standing without enclosure
(Variant A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Closed design – laying on its side with enclosure
(Variant C)

One-part channel laying on its side in enclosed version (enclosure) incl. driver sledge.

Closed design – standing without enclosure
(Variant A)

One-part channel in version with open top and one-part slide plate.

Closed design – standing with enclosure
(Variant B)

One-part channel in version with closed top (enclosure) and one-part slide plate.

Closed design – laying on its side with enclosure
(Variant C)

One-part channel laying on its side in enclosed version (enclosure) incl. driver sledge.

Dimensions

Dimensions | standing without enclosure (Variant A)
Easy Guide System Dimensions without enclosure variant A Front (1)
  1. Guide channel
  2. Stable gliding support made of zinc plated sheet steel or stainless steel
  3. Holder
Easy Guide System Dimensions without enclosure variant A Above (1)
Slide support height
Slide support height h1 = hG

QuickTrax® series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Bi
[mm]
KR
[mm]
h1
[mm]
hKA
[mm]
Total height channel
[mm]
b1
[mm]
BKA
[mm]
A
[mm]
B
[mm]
C
[mm]
C1
[mm]
E
[mm]
F
[mm]
G
[mm]
Y
[mm]
QT0320 with channel holder 202
25 75 25.5 54 202 42 90.7 10 79 140 14 129 40 39 27
50 100 25.5 54 202 67 115.7 35 79 140 14 129 40 39 52
QT0320 with channel holder 155
25 75 25.5 54 156.5 42 90.7 10 79 140 14 129 40 39 27
50 100 25.5 54 156.5 67 115.7 35 79 140 14 129 40 39 52

EasyTrax® series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Bi
[mm]
KR
[mm]
h1
[mm]
hKA
[mm]
Total height channel
[mm]
b1
[mm]
BKA
[mm]
A
[mm]
B
[mm]
C
[mm]
C1
[mm]
E
[mm]
F
[mm]
G
[mm]
Y
[mm]
ET0320 with channel holder 202
25 75 25.5 54 202 42 90.7 10 79 140 14 129 40 39 27
50 100 25.5 54 202 67 115.7 35 79 140 14 129 40 39 52
ET0320 with channel holder 155
25 75 25.5 54 156.5 42 90.7 10 79 140 14 129 40 39 27
50 100 25.5 54 156.5 67 115.7 35 79 140 14 129 40 39 52

Dimensions

Dimensions | standing without enclosure (Variant A)
Easy Guide System Dimensions without enclosure variant A Front (2)
  1. Guide channel
  2. Stable gliding support made of zinc plated sheet steel or stainless steel
  3. Holder
Easy Guide System Dimensions without enclosure variant A Above (2)
Slide support height
Slide support height h1 = hG

UNIFLEX Advanced series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Bi
[mm]
KR
[mm]
h1
[mm]
hKA
[mm]
Total height channel
[mm]
b1
[mm]
BKA
[mm]
A
[mm]
B
[mm]
C
[mm]
E
[mm]
F
[mm]
G
[mm]
Y
[mm]
UA1455 with channel holder 202
58 125 36 100 202 79 127.7 43.5 73 152 123 52 39 64
78 125 36 100 202 99 147.7 63.5 73 152 123 52 39 84
103 125 36 100 202 124 172.7 88.5 73 152 123 52 39 109
UA1455 with channel holder 155
58 125 36 100 156.5 79 127.7 43.5 73 152 123 52 39 64
78 125 36 100 156.5 99 147.7 63.5 73 152 123 52 39 84
103 125 36 100 156.5 124 172.7 88.5 73 152 123 52 39 109
UA1555 with channel holder 202
50 125 50 115 202 73 121.7 30 61 176 111 76 39 58
75 125 50 115 202 98 146.7 55 61 176 111 76 39 83
100 125 50 115 202 123 171.5 80 61 176 111 76 39 108
UA1555 with channel holder 155
50 125 50 115 156.5 73 121.7 30 61 176 111 76 39 58
75 125 50 115 156.5 98 146.7 55 61 176 111 76 39 83
100 125 50 115 156.5 123 171.7 80 61 176 111 76 39 108

Standard version of the cable carrier in the Easy Guide System without glide shoes.

Dimensions

Dimensions | standing with enclosure (Variant B)
Easy Guide System Dimensions with enclosure variant B Front (1)
  1. Guide channel
  2. Stable gliding support made of zinc plated sheet steel or stainless steel
  3. Holder
  4. Enclosure
Easy Guide System Dimensions with enclosure variant B Above (1)
Slide support height
Slide support height h1 = hG

QuickTrax® series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Bi
[mm]
KR
[mm]
h1
[mm]
hKA
[mm]
Total height channel
[mm]
b1
[mm]
BKA
[mm]
A
[mm]
B
[mm]
C
[mm]
C1
[mm]
E
[mm]
F
[mm]
G
[mm]
I
[mm]
Y
[mm]
QT0320 with channel holder 202
25 100 25.5 236.5 269.5 42 90.7 10 79 140 14 129 40 152 54 27
50 100 25.5 236.5 269.5 67 115.7 35 79 140 14 129 40 152 54 52
QT0320 with channel holder 155
25 100 25.5 236.5 269.5 42 90.7 10 79 140 14 129 40 152 54 27
50 100 25.5 236.5 269.5 67 115.7 35 79 140 14 129 40 152 54 52

EasyTrax® series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Bi
[mm]
KR
[mm]
h1
[mm]
hKA
[mm]
Total height channel
[mm]
b1
[mm]
BKA
[mm]
A
[mm]
B
[mm]
C
[mm]
C1
[mm]
E
[mm]
F
[mm]
G
[mm]
I
[mm]
Y
[mm]
ET0320 with channel holder 202
25 100 25.5 236.5 269.5 42 90.7 10 79 140 14 129 40 152 54 27
50 100 25.5 236.5 269.5 67 115.7 35 79 140 14 129 40 152 54 52
ET0320 with channel holder 155
25 100 25.5 236.5 269.5 42 90.7 10 79 140 14 129 40 152 54 27
50 100 25.5 236.5 269.5 67 115.7 35 79 140 14 129 40 152 54 52
Guide channel required

Our engineers will be happy to help with your project planning – please contact us.

Dimensions | standing with enclosure (Variant B)
Easy Guide System Dimensions with enclosure variant B Front (2)
  1. Guide channel
  2. Stable gliding support made of zinc plated sheet steel or stainless steel
  3. Holder
  4. Enclosure
Easy Guide System Dimensions with enclosure variant B Above (2)
Slide support height
Slide support height h1 = hG

UNIFLEX Advanced series

The cable carrier outer width without attachments Bk is taken into account for calculating the inner width of guide channel b1 and the overall width BKA.

Bi
[mm]
KR
[mm]
h1
[mm]
hKA
[mm]
Total height channel
[mm]
b1
[mm]
BKA
[mm]
A
[mm]
B
[mm]
C
[mm]
E
[mm]
F
[mm]
G
[mm]
I
[mm]
Y
[mm]
UA1455 with channel holder 202
58 125 36 297 330 79 127.7 43.5 73 152 123 52 212.5 100 64
78 125 36 297 330 99 147.7 63.5 73 152 123 52 212.5 100 84
103 125 36 297 330 124 172.7 88.5 73 152 123 52 212.5 100 109
UA1455 with channel holder 155
58 125 36 297 330 79 127.7 43.5 73 152 123 52 212.5 100 64
78 125 36 297 330 99 147.7 63.5 73 152 123 52 212.5 100 84
103 125 36 297 330 124 172.7 88.5 73 152 123 52 212.5 100 109
UA1555 with channel holder 202
50 125 50 311 344 73 121.7 30 61 176 121 76 226.5 115 58
75 125 50 311 344 98 146.7 55 61 176 121 76 226.5 115 83
100 125 50 311 344 123 171.7 80 61 176 121 76 226.5 115 108
UA1555 with channel holder 155
50 125 50 311 344 73 121.7 30 61 176 121 76 226.5 115 58
75 125 50 311 344 98 146.7 55 61 176 121 76 226.5 115 83
100 125 50 311 344 123 171.7 80 61 176 121 76 226.5 115 108

Dimensions

Dimensions | laying on its side (Variant C)
Easy Guide System Dimensions laying Front
Easy Guide System Dimensions laying Above

QuickTrax® series | UNIFLEX Advanced series

Bi
[mm]
KR
[mm]
hKA
[mm]
Total height channel
[mm]
b1
[mm]
BKA
[mm]
A
[mm]
B
[mm]
C
[mm]
C1
[mm]
G
[mm]
I
[mm]
QT0320 | UA1320 with channel holder 202
15 48 132.5 202 32 80.7 85 128 14 48 54
25 48 132.5 202 42 90.7 10 85 128 14 48 54
50 48 132.5 202 67 115.7 35.5 85 128 14 48 54
QT0320 | UA1320 with channel holder 155
15 48 132.5 165.5 32 80.7 85 128 14 48 54
25 48 132.5 165.5 42 90.7 10 85 128 14 48 54
50 48 132.5 165.5 67 115.7 35.5 85 128 14 48 54

Fixing Elements

For variant C (laying on its side), the holders have to be mounted on the joins. For variant A and B, the holders can be installed in any position.

Mounting with holder 155
Easy Guide System Mounting with 155 Front
Easy Guide System Mounting with 155 Side
Easy Guide System Mounting with 155 Perspective
Mounting with holder 202
Easy Guide System Mounting with 202 Front
Easy Guide System Mounting with 202 Side
Easy Guide System Mounting with 202 Perspective
Mounting kit

Set for fixing the holders on the channel.

Installation kit

  1. Holder
  2. Holder clamp
  3. Join connector
  4. Nut
  5. Screw M4 x 12
  6. Screw
  7. Washer
  8. Washer
Easy Guide System Mounting Kit (1)
Easy Guide System Mounting Kit (2)

Order example

Channel

Order code

TKEG

B

00

100

99

10

Important information

Caution: Not all combinations are possible. 
Please note the information on the individual channel variants.

Holder

Order code

TKEG

H202

20

Matching with

Cables for cable carriers – TRAXLINE®

Reliable, robust with high availability. Your benefit from many years of experience combined with ongoing optimization, proven in tests and praxis. TRAXLINE® cables stand for competent system-supply with worldwide on-site service.

to TRAXLINE®

Ready-to-connect cable carrier systems – TOTALTRAX®

From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.

to TOTALTRAX®

Accessories

Reliable unrolling and optimum gliding for long travel lengths

to Support trays
to Guide channels

For optimum placement with dynamic use of cables

to Strain relief devices

Services

Product Configurator
Product Configurator
Close

Product Configurator

  • Efficient, quick and complete configuration ­ the result is your individual product with an excellent price-performance ratio
  • Product configurator OnlineEngineer + suitable CAD model from CADenas without having to exit the portal
CADenas
CADenas
Close

CADenas

  • Decrease your engineering times
  • Accelerate your design processes
  • Configure with original data directly from the manufacturer
  • Providing 3D component models in a variety of CAD formats
Glossary
Glossary
Close

Glossary

Cable Carriers – Overview of general abbreviations and pictographs

Technical information
Technical information
Close

Technical information

Configuration guidelines:

  • Selecting a suitable cable carrier
  • Placement guidelines for cables and hoses
  • Installation variants
Literature
Literature
Close

Literature

The latest TSUBAKI KABELSCHLEPP information material:

Product filter
Product filter
Close

Product filter

Our product filter supports you in finding the right cable carrier. Simply select your desired parameters and you will quickly get an overview of all suitable type series.

Subject to change.
Contact
Please contact us:
Your contact: